The holder expert, Andobil, does more professionally. The metal vent clip could hold your phone firmly even on a bumpy road. The andobil holder is the first one within the market that is adapted to the aviation material. The first foot of car phone holders on Amazon was designed by Andobil product manager. The cell phone power or volume button can be squeezed by the arm. All 4-7 inch phones are compatible. The switch button was upgraded to make it easier to press it, and also to open the arm for only 0.1S. Andobil car phone brackets can be closed by repeated tests. The Andobil phone mount holder has anti-slip rubber pads, stable support shelf, firm claw, and scratch-free grip to ensure safer driving. You can easily see your favorite app when you choose your best angle. Voice commands and telephone calls can be used hands free. Thanks to their customers, Guard Your Travel. The clips have been improved to solve the issues. They can't say that this product fits all air vents. They will offer you a solution if you have any problems during use.
👤The Andobil is more convenient than previous holders for phones in the car because it allows you to put the phone in the holder and then remove it when you reach your destination. You had to use two hands to spread the side clips and insert the phone, and then you had to use the single touch cradle to remove the phone. Place the phone in the holder, squeeze the side clips to insert the phone, then press the side clips to remove the phone. No power is required for a true one hand operation. I have a power cord that I can use to charge my mobile devices. I need another one for my wife's car.
👤So far, so good! Great purchase! If you clip it to the vent tight, it stays put. . One time, the mount fell off the vent. I don't know why the manufacturer didn't put the Silicone pads in the Vent clamp like they put in the Arm clamps, but I am sure it will happen. It fell off because it was slippery and needed a silicone grip. I cut a piece of the cabinet liner and put it between the vent and the clamp, but it stays put, but everything else works good! The phone is held tight by the arms. The phone is quickly released by the quick release button. It is great. I don't have to look down at my phone to see my directions. Don't forget to grab your ph out the mount when you get out of the car, I will leave mine.
👤I like the way this holds my phone in front of the A/C vent. The steering wheel blocks the view from the other vent, so I use it on the left side vent. If you can't use it left-handed, you should look for a mounting device that doesn't use the vent. The ball mount allows me to orient the phone and the grip is strong. I can see it. I can plug in my phone to keep it charged.
👤This actually works. When I opened the box, I saw that this was something that goes into the car vent. I thought I was ordering a CD player because the picture wasn't clear. I tried a few that went into the vent and they were a total waste of money. It was with fear that I tried this in the car. I was surprised at how easy this was to install and that it held my phone securely, even though it did not wobble or anything. It held tightly to the vent and did not move a single iota. This is a great purchase.
👤If you spray a little bit ofWD-40 on the internal gear teeth, hold down the button, and flex the locking arms a few times, you will be fine. The product holds up well and is secure. When I first bought this product, I was afraid that the internal gears would eventually seize and break. When I charge my phone, it gets hot so I decided to get an air vent charger to keep it cool. When the button became difficult to push, my fears were realized. This was fixed with a little bit of WD-40. It is a decent product if you add redneck elbow grease. Many consumers will think of a product as a bad one when they experience it seizing, locking up, and eventually breaking it, because they don't know what it is.
The car phone holder is strong and strong magnets. The magnetic phone car mount has a strong Rubidium Magnet N52, which provides strong magnet power. It can hold large phones. The phone signal wouldn't be affected by the closed magnetic field. Keep your hands off the steering wheel. The metal plate on the phone is the first thing that can be adhered to. The phone magnet for car vent phone holder is very easy to install. You can transfer it to any car in 1 second. Put your phone on the magnetic phone mount in 0.1s, and insert it into the air vent. It's easy to use and you can save a lot of time. The phone vent holder is super flexible and provides optional angles. Help you use a gps device with better viewing angles. Car Vent Phone Mount is universal. The magnetic cell phone holder for car is compatible with all phones and cases. It's compatible with the iPhone 13/ 13 Pro/ 13 Mini. Pro Max/ 12 Mini/ 12 Pro/ 12 Pro Max/ SE / 11 Pro / 11 Pro Max / XS MAX / X / 8 / 8 Plus / 7 / 7 Plus / 6 6s. There are also the S20, S20+, S20 Ultra 5G, Note10 and Note 8. Plus, S8 and S8+, S7 and S7 Edge, and S7 and S7 Edge. The VICSEED car phone holder mount is made of aluminum alloy and liquid silicone. The car phone mount is small and space-saving. This car holder can fit most of the air vent. The air vent is protected from scratching. No damage is caused by holding your phone firmly.
👤I really like it. I used the Magnet for a week and it was so strong that my phone never fell off and the holder stayed in the same place. The holder is made of sturdy aluminum alloy. I use my phone's gps device as a food delivery guy. I had to get something to hold my phone to make sure my guests and myself were safe, because the law forbids hand-held devices while driving. The mount definitely helps a lot. I don't need to hold the phone anymore. It makes my driving easier. It's easy to change direction. It's easy to install. It is a must have accessory.
👤The product worked better than I anticipated. I already own the case pictured above with the metal plate on the back so this mount works great for me even without the metal plates. I'm pretty sure that if you used the plates instead of the case, it would work just as well. The magnetic mount is strong enough to hold my phone in place. The phone is stable at all times because the mount absorbs the road and car noise. This product is better than the cheaper brands.
👤It works if you stick the magnet on your phone. This will not be able to hold up the new phones.
👤The magnetic phone holder is the best one I've ever purchased, it holds my phone very hard, and it's the third one I've purchased. The way it is designed to stay in the ac vent doesn't move at all.
👤The mengo Magnetic car mounts broke in half. I couldn't use it anymore. I was looking for a mount that would keep my phone in the picture. It lasted for a couple of years. The magnet on the back of the phone is strong and stays in place. I was afraid of putting the magnet on my phone. I have not regretted it so far. I had to adjust the position of the mount to attach to the Mengo's magnet because it was loose behind the phone. The Mengo magnet does not stay in portrait position and wears out quickly. I had to remember not to be distracted by it because it often spins out of place while I drive. I liked that it could be put on the vent of the car. I rate this product 5 out of 5 stars.
👤Awesome product. I have bought some in the past that wouldn't stay on but this one is amazing. It holds my phone and stays on.
👤I have given gifts to out of town rental car clients of another brand I loved on Amazon. This brand is my new favorite because of its heights. If you have a vent like the one in the car dealership, it's a better brand as it makes the phone sit a bit higher and makes it easier to see. From now on, buying this brands as a gift.
👤I tried two different dash mounts and they fell off. The magnetic vent mount is so easy that I wish I never tried it.
The Miracase universal car cup base can be adjusted from Min. 2.3" to Max. 4.2", and can be extended to 9 feet. It ensures safe driving, whether you are talking, listening to music, or charging, with a one-button release curved arm and extendable feet. All cell phones and devices with a maximum thickness of 0.99" are compatible with the universal compatibility phone holder. Fit the following phones: Apple's XR/XS Max/XS/X/8/7/7 Plus, the S10/S10 Plus, the S9/S8 Edge, the Note 9 and the Sony phones. You could use your cup holders in a car, truck, RV, boat, golf cart, etc. Miracase 2020 cup phone holder is made with a heavy base and strong neck, which stops shaking. A jointed arm for 270 easy movement and a flexible ball for rotation enhance your best view of the phone. The long neck is designed with a extentable neck. The car phone mount is made of high quality and eco-friendly material. If you have a question, please contact Miracase 24 hours on-line.
👤I don't want to put my phone on my dashboard or vent in my small car. The holder is perfect. It's easy to uninstall and adjust to fit in your cup holder. It does everything I need it to do. I can charge my phone while it is mounted and view it in a landscape. My passenger can see it if he wants to. The product is well made and priced right.
👤The Miracase cup phone holder is the best one I have ever used. I have tried a number of cup holders and finally decided to try a cup holder. If the Miracase is not large enough, the extra pads can be added to the existing padded surfaces to work with larger cup wells. There is foam padding in the area where the securing screw goes through the height extender to make sure you get a tight fit that won't vibrate during driving. Once tightened, the phone holder angle adjustment stays in place. The phone mount has a release button at the top. The brackets are easy to use to hold the phone. They are padded to hold the phone. I would recommend this product to anyone who wants to keep their phone in the car without blocking the view out the window, and I could not be happier with it.
👤It works even better. I like the quick release. I had to use extensions to fit it. I bought one for my best friend and he loves it. The total junk has been updated for two months. The cup holder will not stay in the truck and it always tilts side to side. It worked for a bug. And now it's in the trash.
👤I have had cupholders before. The cupholder is sturdy and adjusts easily, but more than that, it allows you to adjust the distance from the cupholder to the driver. It's great for people with small cars. Like myself.
👤Will not be in the cup holder on the truck. The holder will fall over the first time you hit it. Not worth 20 bucks. Maybe if you drive a prius. Not for trucks. There is a It was very difficult to try and send back.
👤Even though it is plastic, it seems to work well. The phone cradle chatters if you don't have a phone in the holder. I could either put the phone in the cradle or close it to the closed position. You have to reset the phone cradle every time you put a phone in it.
👤The Mircase car cup phone holder makes it easy to use my phone with a blue tooth. My passenger has to use a separate cup holder in the door, which is the only hang up.
👤The product did a good job with my phone. The tension in holding the phone in place started to get loose. I'm very disappointed that this thing stopped working after a year. I may be able to return the item, but I'm not sure if I want another one.
The cell phone holder is applicable to all mobile phones from 3 to 7 inches. Mini -11-11 Pro-11 Plus/7/7 plus, the S8 and S8. Plus, S10, S10, Note 8, Note 9, Note 10 pro. The car phone mount can be used for phones like the IPAD, Mi, and other devices. One-handed operation, insert or remove your mobile phones, small size, is the special design. It can be placed anywhere on the car's dashboard, using a 100 degree comfort angle, which reduces driving blind spots. You can apply to SUVs for Ford, Chevrolet, GM, Subaru, Volkswagen, Benz, and KIA. The cell phone holder and the bottom plastic liner can be washed and re-used, and will not leave any traces when removed. The phone holder is made from high-tech glue and will be the same as the new one, just rinse it and dry it. The cable slot design makes the charging cable well organized. The mat holder has a good amount of space for keys, coins, gadgets and other items. It's a cellphone stand in office or home for meetings, movies, games, and more. It can protect phone against bumps, scratches, and flying out when there is an emergency braking, sudden stop and sharp turn. The double snap design of the vehicle mount will not press the volume keys.
👤I liked the product at first and it was made of good quality rubber, but now I regret buying it. I found the bottom of the glue completely melted in my car, and it's going to take a lot of work to clean it up.
👤It's a perfect solution to sagging phone holders. The holder is rubberized so it doesn't fall. I have purchased at least 10 holders and all break. This one is a winner.
👤I like this holder better than any other I have used, but I think it is dependent on the type of car you have. You need a flat area to place this so you can see the road. I don't like having to look to the side in order to see my navigation, and this keeps everything in my line of sight. Even though it is attached to a slightly rounded area, it is very stable. I tried a cup holder insert with a long arm. I had to look away from the road. The cup holders are too far away from where we should be, and the kind that makes it hard to see the road, is something that always blocks at least some forward visibility. I liked the holder for a long time, but I use my vents too much. It makes a lot of sense in my Civic, even though I thought a long time before I placed it there. I can still hear the car shift even though I am blocking my view of the tachometer, and if I have any concerns, I could remove the phone to see what is happening.
👤Reality sinks in once you start using this product, it seems like a great idea. If you don't need a full screen, but still want to look at your maps at the same time, this might not work for you. It takes some getting used to and most of us are familiar with the things you have to do without on a reduced screen. I will most likely use a full size upright phone holder the next time I have to buy a replacement.
👤I was surprised by how small it is, but I was impressed with how well it works with my phone. Some reviewers said they couldn't use the device with the phone case on. I have a phone in a Silicone case and it fits perfectly. I ordered another one for my husband because I am very happy with this device, but I don't understand why I have to pay for shipping when I already have other items on my new order. If I have to pay shipping, I will cancel the second order.
👤Sits in the car. It may be affected by heat. So far, the sticks are ok. I like it over vent mounts. It's easy to place or remove the phone. The phone seems to stay in place. There is no need for magnets or glue. Depending upon placement, can obscure the view.
You can easily take off your cellphones with the quick one-button release, you just need to press the release button on the back of the cradle. Keeping the phone steady while you drive is accomplished by using gel pads that adhere to any flat or curved portion of your dashboard. The strong cup locks on your dashboard or windshield to keep your phone safe and sound while you use it. You can adjust your viewing angles due to a rotating ball joint. You can adjust your phone in any way you want. The telescopic arm can be extended from 4.2 to 5.8 inches. You can adjust the distance between you and the holder. It's perfect for phones navigation between 2.1 and 3.8 inches. It's compatible with the iPhone X/ Xs, 8 plus, 7 plus, 6s plus, S10e, S9/ S8 and note. The OQTIQ car phone holder is an affordable, multi-functional car phone holder with an air vent clip and a suction cup that you can mount on your air vent, windshield or dashboard. The Oqtiq phone holder is an ideal choice if you are looking for something extra.
👤I couldn't get it to use a cup without using the backing and using the glue. I can't remove the stupid thing from my window. I wanted a cup that was not sticky. I don't want sticky things on my dashboard or my window. I bought this because I thought other reviewers had only used it as a cup. The cup has something on it. The only way to expose the cup is to remove the paper that exposes it and stick it on the window. Disappointed.
👤I was hoping that this would be great but it wasn't. It stuck to my car but the brackets didn't fit my phone and the rotation wasn't good. The weight of my phone made the vent option not work.
👤Adding glue to the cup was a bad decision. The dash board part that was attached to it should have had the glue on both sides instead of applying it directly to the cup. I tried to remove the glue with alcohol and dish soap. Nothing worked. I came up with a solution. I cut a rubber glove in a square. I put the sticky cup on the rubber glove material. I attached the cup to the glass with a damp cup. The rubber glove is very similar to the rubber cup. I don't know if I have an idea of longevity. It should create enough force to hold the attachment to the windshield. The rubber gloves cover the sticky on the cup and still allow full function. Hope this helps.
👤This is a good product and a good value. The arm can be adjusted in length, meaning it will work regardless of the slope of the windshield. The phone mount is solid and the cup holds it. It was hard to see the phone while in motion when I had others that were so shaky. Thant is not a problem here. The phone mount on my phone holds it perfectly, avoiding the buttons on the phone. I haven't tried the vent mount or the flat dashboard mount.
👤I did not know that the cup was topped with a sticky coating. I put this product on my car, and the next day I took it off, it was stuck on my car, even though the suction was removed. I had to take a credit card to pry the cup off. If you are going to place this in your car, I would suggest you prepare for it to be semi-permanent and be prepared for it to leave a sticky mess. The vertical cradle is not adjusted, only the side horizontal "wings" to accommodate the phone's width is a flaw. The device is less stable and secure when positioned side ways because of how long newer phones are. It works, but the sticky mess that the suction cup leaves behind is something to be aware of.
👤Since I don't have a gps, I used this for my car so that I wouldn't have to hold my phone while I drive. I don't like card gps as much as I do a mobile phone, so I prefer not to use them. When I received this, there was no instructions on how to set it up. I had this happen before and I had to figure out how to get something apart for another purchase. The glue is sticky. I thought that was cool. It does not leave a stick on your finger. When I stuck it to the glass, I had a feeling that it would fall as soon as I put my phone down. There is a button on the back of the phone that loosens the arms that hold it. You don't have to force it open. You can make the arm smaller by squeezing the sides. It is possible to tighten it to the point where your phone won't droop. I think it's a good idea to put it in a spot that isn't your blind spot. I'm not sure if I can stick it somewhere else if I remove it from the windshield. I'm afraid that it won't stick well if I move it somewhere else. I will let you know if I do it. I will make a video in the daytime since it's too dark.
There is wide similarity. The gps dashboard mount for gps devices between 3.0 and 6.8 inch is suitable for most kind of cell phones. It's compatible for the Iphone 13-13 Pro 13 Mini 12/12 Pro/ 12 Mini/ 11/11 Pro 11 Pro Max/ X-8. Plus/7/7 plus/ 6s/6s. The plus/6/6 plus/6Se/6s/6/4s are the same as the plus/6/6 plus/6 and the plus/6. S 20/ 8 is a pro. S 20 Plus/ 8 plus/ 9 plus 10 Plus, the S 7 Edge, the Nexus, the Pixel, the Sony, the HTC, the Mi, and the other devices. Anti-SLIP & STABLE. The car cell phone holder is made of a large gel base and does not leave a mark on the dashboard. No harm is done to your device with their car phone holder mount. No mechanical installation is required when adhering dashboard phone mounts to smooth surfaces. Cell phone holder will not slide or shake even in an emergency brake, and it's triple reinforcement on the dashboard. CONVENIENT DESIGN. The screen of the phone can be seen without reflecting light, and the mount prevents the device from being heated by sunlight. Doesn't bring visual blind spots. The upper and lower ends of the phone are soft rubber mats, which will not allow you to press the volume keys. It is possible to wash and reuse. The dash phone holder is made from high-tech glue. It will be the same as the new one if you rinse it with water and dry it. There are tips and warranties. This item is only compatible with a flat dashboard, not compatible with curved surfaces and irregular dashboard. Before buying, please check the dashboard. 30 days money back and a 12-month worry-free guarantee are offered. Customer service is done 7 days a week.
👤Hey, this is a really great invention. I use the gps daily for my work. I think this holder is a little too open, but it's not at all. It looks okay on my car. I don't have a fancy car, but I'm picky about how it looks. This holder looks good, I drive a 2016 Equinox. It's not stuck in my vents, which is a bonus. Buy it. It's seriously.
👤It blends well into the decor of the car and holds the phone securely. The only downside is that it requires a flat smooth surface to adhere best. I used a rubber base and a piece of Velcro to attach the device to my car.
👤They said we would get the item. Not really happy with it. We have tried different phones in the item to see if we can use it. The phone goes flying if it is moved even slightly. It was supposed to be used on the go for backseat passangers. That is not going to happen. It is usually forgotten because of the annoyance of having to keep putting the phone in it.
👤The holder was able to fit a case that was half an inch thick. My previous phone was a S5 with a thin case and the holder on the dash could only hold a maximum of 0.275 inch. The contact area of the patch is small. The new holder keeps the sun from shining on the phone and it can get hot. The clam shell door has a very strong spring force which makes it difficult to open it without lifting the base off.
👤I didn't want to take the phone out of the rim that holds it because I couldn't find a phone holder that worked with my phone inside the wallet. Other holders didn't work for me. This one only works on a flat surface, and the only flat surface on my dash is the one right in front of a display, so that's not ideal because this is a large holder. The dimensions are read. It covers up most of the display when my phone is in it, but it's not a big problem because the driver displays are right in front of the driver and not affected. The closed clamshell doesn't cover anything. It is nice looking.
👤This is the second one I've purchased. I love it! I can put my phone in it with one hand. I put my phone in the first one every drive because of the good glue adhesion. Never stopped. I had to buy a second because I sold the vehicle. I didn't know what to do if I tried to remove it.
👤I am very satisfied with this product and can recommend it. We will see if it can survive the hot Texas weather in the summer. In a few weeks, I'll be updating my comments. There are 1 positives. It was easy to install, stuck on the smooth plastic dash area above the radio. 2. My phone is large and heavy, but it fits perfectly, it has a ring case on it, and it also has a large screen. 3. The design of the car helps shade my phone. 4. The device was steady through all the traffic and bumpy roads. There are 1. Many apps use it for portrait view. 2. It would be better if it had an auto open button release feature that I could use one-handed to insert or remove my phone.
The dashboard cell phone holder is compatible with most types of cellphones and gps devices. There is a car mount for the 13 and Pro 13 models. Plus/7, Plus/6, plus/6, plus, S20/S 8 pro 20 ultra. S 20 plus/ 8 plus / 9 plus 10 Plus, S 7 Edge, Nexus,Pixel, Sony,HTC, Mi, and many more. Even with a case. Pop sockets case can't fit. The new version of car cell phone holder made of environmental friendlyABS material can be universally mounted to dash. The bottom of the phone holder is made of high-tech sticky material that is easy to clean. Use a sticky rubber pad to keep your phone from being scratched. Before installation, clean and dry the surface with a cloth. Stable for various of cars. The phone mount is a good choice for most of the cars, pickup trucks, SUV, trucks, taxis, and as an assistant for drivers. It can be fixed on the dashboard of your car, whether it is driving on highways, urban roads, speed bumps, suburban roads, deserts, or it is hot summer or cold winter. The car phone holder mount is anti- sunlight and provides you with the best viewing angle. The phone can be placed in either horizontal or vertical. You can see the screen without reflecting light and the device can't be heated by sunlight. It allows you to operate the device without lowering your head, it does not hinder your vision while driving, and it has a scientific vision. 60 days money back and 24 months product replacement are offered by professional support. If you have a problem, please contact them immediately. Enjoy the experience.
👤This one stays put on the dash and holds the phone vertically and horizontally, after many tries. Thank you.
👤It works great. The only problem is that it isn't deep enough to hold my phone upright, as most of us have phone covers so needs to be deeper to hold on to cased phones.
👤This is the first cell phone holder that works for me. When my phone is not in the holder, it is closed so that my view is not impeded. I love it!
👤My wife liked it when it stayed on her dashboard. We followed instructions on how to apply the glue. The rotation feature is nice and the holder is nice. We had to use our own glue to use the product.
👤This is what I was looking for. It is very sturdy and can be used vertically or horizontally.
👤It was easy to install and stay attached to my car for a while, but I wish it would have stayed longer.
👤This phone holder is perfect for a small commuter car.
👤The case came off the dash when I put the holder down firmly after cleaning the dash. The glue is terrible. The holder is large. The product was thrown in the trash.
The syncwire car mount comes with 3 years of support. The phone holder cannot be used for your car if there are missing accessories. You can get a replacement. It's not compatible with: thick cases such as Otterbox, wallet Case and battery Case. The 4th Generation Neodymium Magnets are compatible with most phones, including the new iPhone 13 Pro Max, 13 Pro, and 13 Pro, as well as the Note10+. The magnetic car holder has a smooth surface to maintain its glowing surface and soft yet durable touch. Reliable 3M VHB adhesive pad provides strong stick force. Driving on a rugged mountain road, going over a speedbump, and sudden braking are all situations that are Sturdy in. With a solid metal ball joint, you can change the position of your phone or display. A small cell phone car kit.
👤I was skeptical about the car mount's capabilities because my phone is larger and heavier than the mount, making it even larger and heavier. I didn't think that a small metal plate could stick to the mount, especially if it was going over railroad tracks, or if the phone was leaning down or moving from where I placed it. I've had this mount for a year. 1) Having my cupholders available again has been great. This makes it a lot easier to look over my maps on my phone, and I don't have a smooth dashboard. In Central Texas it gets hot so I thought the mount would slip/slide and come off in the summer. I'm impressed! I've ever spent $13.75.
👤It was easy to install the car and phone mount. I had some doubts about the strength of the magnet, but I am very happy with it. It is strong enough to hold my larger phone, and it is very good made. My phone has not fallen off when I drive over bumps. It comes with metal plates that can be used to put on the back of your phone or case. I think you will like it. The piece that was attached to the dash fell off. I was hoping it would last a little longer than that, but I guess you could just reattach it and hope it stays on next time.
👤I like the quality of the product and how it will stick to my phone. It didn't stick to the dash in my car. I used up the pads. The company is called Syncwire. I love their cords. The cords stay in my phone, they have solved many problems for me. I have a wireless headset that is the best I have ever heard. I like this phone holder. I hope to work with people from Syncwire to put it on my dashboard. I love this phone holder. The feel of it is solid. Many phone holders feel like cheap plastic held together weakly, this one feels heavy and strong. I had trouble sticking it on my dashboard, even after I cleaned it. I used Gorilla Super Glue to glue it to the dash. I took it on a road trip the next day and it was great. It's easy to use. The tilt function of the ball joint can be used to adjust the screen in the sun. I put my phone where I put it. There was no adjusting the plastic pieces. This is a very good product, and I am enjoying it.
👤It was 3 years of support. The product I purchased last September was a big fan of, but the glue failed this past month. I messaged Syncwire to see if I could get another backing for the magnet, since I like it so much. I was told to search for a replacement on Amazon since I didn't purchase it from them. I'll be moving on to another product, not keeping loyal/return customers with that kind of support.
The dashboard cell phone holder is widely compatible with most types of cell phones and gps devices. Including the iPhone 11/12/11, Pro 11/12/11, Pro 11/12/11, Pro 11/12/11, Pro 11/12/11, Pro 11/12/11, Pro 11/12/11, Pro 11/12/11, Pro 11/12/11, Pro 11/12/11, Pro 11/12/11, Pro 11/12/11, Pro 11/12/11, Pro 11/12/11, Plus/7/7 plus/ 6s/6s The plus/6/6 plus/6Se/6s and the plus/4s and the plus/2s and the plus/2s and the plus/2s and the plus/2s and the plus/2s and the plus/2s and the plus/2s and the plus/2s and the plus/2 S20/S 8 pro 20 ultra. S 20 plus/ 8 plus / 9 plus 10 Plus, S 7 Edge, S7 Edge+, S7 Edge+, S7 Edge+, S7 Edge+, S7 Edge+, S7 Edge+, S7 Edge+, S7 Edge+, S7 Edge+, S7 Edge+, S7 It can protect phone against bumps, scratches, and flying out when there is an emergency braking, sudden stop and sharp turn. It's Washable and Reusable. The car phone holder is made from high-tech glue. It will be the same as the new one if you rinse it and dry it. If you want to lay the phone holder on the dashboard, you should remove the sticky film from the bottom of the car phone holder.
👤This has been in place all summer long, and I use it multiple times a day to squeeze my phone into it. It holds up well and is my favorite mount. The mounts that stick straight to your glass are worse. Before applying, be sure your dashboard is clean. I have a charging cable that I store in the little notch. It was used on a Toyota Highlander. I'm 6'1" I can see over the phone while driving. Hope this helps!
👤I like the phone holder a lot. I have a large, bulky, and heavy phone and a job that requires a lot of local driving, so I have a case for it. When I get back in my car, I grab my phone from the holder and put it back in my car. This is the first phone holder that has kept my phone in place, and it only slid under the seat. I've tried the cup holder, vent, and suction cup on the window types that have the "arms" that grip on each side and no luck. They were too flimsy to stay mounted and would not fit my phone case. I decided to try this style as a last resort, hoping it would work, but expecting that I would have to do a modification within a few days. No such action is necessary. This is a miracle product for me. It stays put on my car, it holds my phone securely, and I can change it when I need to. The product is great, the warranty is great, and the price is great. It showed up in one day.
👤Many types of mounts don't work well with most types of cars. It would be universal in working regardless of your car. You can easily place it right where you want it, instead of being limited to placing it near the vent or something like that. The hold is tight. You should put your phone in before you place the mount down. Make sure you place the mount in a way that it sits upright. If you put it wrong, the nice thing is that it will peel back off and stick securely again.
👤I love this thing. I have bought it for many of my friends. It is soft silicone. It holds my phone securely so that I can use the gps while I am driving, so I don't worry about it damaging my phone. I have had it for four months now and it has stayed where I put it, despite the change in temperatures on the North East. I think you could just spray some water under it and it would be sticky for a little while before it dries. I don't want to move it. It looks like it is in the dashboard. People are surprised when I put my phone in it. It only holds your phone in landscape mode, but has held my friends' phones in a variety of cases. If you think about it, I tried many before this one - vent, cd, windshield, and nothing compares! My vent was blocked. I was blocked from using my touchscreen. I always worried that the window would fall down. It keeps your cell phone in your line of vision without being in the way.
This universal cell phone car mount uses a third-generation suction cup, with three layers of super glue, which makes it stick to your car dashboard or windshield. The most suitable wrapping angle for the car mount was found after a year-long test. The arm is wrapped more than normal mounts. It hugs the child like a father's arm. The heavy duty phones, such as the iPhone 12 pro max / iPhone 11 pro max, are a perfect choice because of their strong arms. Kidproof! It's scratch-proof! The small silicone pads have been rigorously tested. They use the latest vacuum nanotechnology, which can adjust the shape of the silicone according to the size of the phone, to ensure that there is no gap between the phone car holder and the phone. You don't have to worry about your phone falling off during the journey! The car phone mount can be installed on the dashboard, the air vent or the windshield. It won't stop working even on the off road, it's a great choice for most of the cars, pickup trucks, SUV, trucks, taxis. Say goodbye to the easy-scratched plastic panel car mount with the military grade PP material. Excellent appearance and high quality! It's a great decoration and a car holder as well. The Super secure car phone holder has a tight grip on the phone and a lock on the dashboard.
👤It's a nice holder. The pinchers aren't deep enough to hold a thicker style case. It's a shame.
👤I didn't have a good experience with this 3 in 1 cell phone car holder. I left a review with 2 stars. Linda from customer service at the company called me the next day to say that she was concerned about my disappointment in their product and was wanting to make things right. She gave me several options of other devices that would fit my needs better in a car mount. I could not be happier with the one pictured. It was shipped to me within 4 days after I decided on that model. It has a "hook" on the back of the air vent blade that can be adjusted to lock it on tight, and two feet that can be removed from the lower side to make a mount. You can hang a full water bottle on this thing. I like that it has some space between the vent and back of the mount so air can still pass through without being blocked. Linda was so helpful and concerned about her customer that she did everything she could to make them happy. She provided excellent customer service. If you're looking for a reliable cell phone mount for your car, I highly recommend the products from the Torras company. They will do whatever it takes to make it right if you don't like their customer service. Thank you Linda for all you did! I will buy from that point again.
👤When using a gps app, I wanted a cell phone holder for my car. The holder is perfect for me. It is easy to install and fit in my car. The directions for installation were good because I am not good at putting products together and installing them. I was thrilled to find out that the holder fits my phone perfectly, even though the description only said it fit 7 to 11 or 12. It is easy to use. The release button is located at the top of the holder. You can release the phone by holding the button until the clamps are open. You have to remove the phone. The phone is secured in the holder by squeezing the clamps together. Done! If I wanted to change the angle of my phone, I could adjust it by rotating it sideways or forward in the holder. What is the bottom line? I am able to see my phone while driving. I think this is a great solution for anyone looking for a similar one.
👤I like the cell phone holders. I don't like writing a lot of reviews. These things are cheap, but the Torras group has listened to customers, made changes, and become the better manufacturer for your products. I have had 2 of them over the last year. They are excellent. Gave one as a gift. Good job, Torras! Will continue to be a customer.
👤After 3 months, I received a replacement version of the suction cup from Torras Customer Care. I said that I would give it a try. It was installed in a few days after it was in the mail. I like the design of the new cup. Time will tell if the new included tape can handle the heat and bumps. For the time being, it is a 5. I was expecting good mounting tape, but it is an okay product. The design is versatile enough to make it easy to switch between the two mounting mechanisms. I need to mount on the dashboard on bumpy roads, but the included tape doesn't work. When my phone was mounted to the air vent, it fell even faster. I had to buy a few more dollars to mount the mounting tape onto the dashboard, because I had to shelf out a few more dollars. I need the phone to stay still, even though it might be hard to remove later. The last thing I want is my phone flying around and hitting the emergency light button, which happened to me when I used the original mounting tape.
The latest enhanced Humixx car phone holder mount has passed over 1000 tests and reached military-grade effects! The car cell phone mount has a locking mechanism and a gel sucker that is 3 times stronger than ordinary suction power. The car mount's cup can work well in extreme weather, even in temperatures as low as -20C. Remove the phone car holder with water and dry. Do you know which method is better for your car? No worries! The 4 in 1 car phone mount can be used in many different ways. The places that work perfectly are the dashboard, Windshield, and Air Vent. You can avoid the issue caused by environmental influences if you choose to, because of low temperatures in winter and heat in summer. It's suitable for all cars like sedans, pickup trucks, SUVs, and taxis. The Humixx team selects aviation material PEFT and components lab-tested to ensure sturdiness. The ball joint and arm of the mount are 10 times stronger than normal ones. The ball joint is adjusted for optimal viewing angle. You can adjust the cell phone holder in your car to keep it out of sight and ensure driving stability. The stability of the mobile phone holder for car is based on the investigations of many users. This cell phone car holder has a built-in metal that can hold at the air vent on bumpy roads and is the latest improved version of the triangle stable mode vent clip. The vent clip has a silicone pad that protects it from damage. The plastic panel phone holder is easy to scratch. The shock-proof texture of the mount is made of PU material. A car mobile phone holder has a thick layer of Silicone. No scratches are made on mobile phones with the comprehensive protection design. When you need them, Humixx employees will always be here to help.
👤I had previously reviewed this product and said that it was not up to the description. I am here to review the product after learning that it was not the fault of the cup that I was having issues with, but the residuals of wax left behind on my dashboard. If they included a small alcohol wipe in the kit, it would be helpful to remove wax that may be left behind by other cleaners. After cleaning the area of the car. The phone holder was going to be placed on the cup, so it wouldn't come loose. It has been enlightening to finally figure this out, and can't say enough about their customer service, and the help they gave me in resolving this problem. There is a I would give this young lady a 10 star review for her customer skills. She is deserving of the praise she is getting from her superiors. Thank you!
👤I've been looking for this phone holder for a long time. It is very easy to put a phone on it. It is important for me to have food delivery. It comes with two ways of attaching equipment. You can either attach it to the air vent or to the windshield. It seems very durable, and it is amazing.
👤I've tried a lot of different cellphone holders for the car, dash, wind shield, vent, magnetic, and CD rack mount. Everything in the beginning serves the purpose, but eventually wears out or loosens the grip, so it's a waste of time. This one is strong enough to hold the extra organs. The extra projection helps when you want to reach out to the phone. An idea. For my needs, I placed this on the dash and used it as a windshield mount or air vent mount. So far it's holding up. When you drop a heavy phone into the slot from the top, the tilt angle comes down slightly to avoid this, you have to place the phone gently. I don't know if it is intended to tighten enough or not. I am very pleased with this product and I like it very much.
👤This product is terrible. The phone holder is okay, but the part that holds the phone is terrible. It's not really a base, but a plate which is supposed to adhere to your dashboard or the windshield. The phone mount is weak and it keeps falling off the dashboard as I place my phone on it. I cleaned my dashboard before putting the plate on it. I put the base on the car and it falls off. I don't recommend this product.
👤There is a large screen in the middle of my car. The screen can't replace the phone. I use my phone to navigate. I need to check to see if I have received any important notifications. My friend recommended this item to me because I really need a car phone mount. It's difficult for me to pick a mount. There is no place to put vent clips in my car. The telescopic arms of some mounts aren't long enough, which makes it hard for me to use my phone well. The mount is installed on my dashboard and it can send my phone close enough in front of me. I can use Face ID to get my phone unlocked while I'm driving. I think it has been made completely perfect, nice appearance, excellent workmanship, simple installation, and easy to use, as a mount. Thank my friend for suggesting this, it is very satisfying.
Gps phone holder car samsung products from Andobil. In this article about gps phone holder car samsung you can see why people choose the product. Vicseed and Miracase are also good brands to look for when you are finding gps phone holder car samsung.
Andobil, Vicseed and Miracase are some of the best brands that chosen by people for gps phone holder car samsung. Find the detail in this article. Staont, Oqtiq and Bosynoy are also brands that their products are worth to check.