Best Gps Mount Pad

Mount 3 Feb 2023 10+ Comments Open

1. Adhesives Transparent Double Sided Windshield Dashboard

Adhesives Transparent Double Sided Windshield Dashboard

9PCS double-sided sticky pads are used for the Dashboard Suction Cup Mount. You can apply transparent glue to your shower shelf, shower caddy, car phone mount, shor head, and other items. You can cut it to the size you need. The package doesn't include the mounting disk. Clean the surface before you mount it and let it dry and free of the dirt. Before applying the pads, please make sure the surface is clean and dry. Galundge's very high bond glues let you quickly and easily create a long- lasting bond, bonding almost instantly. It is easy to peel off without leaving a sticky mess. Adhesive can only be used once. Silicone items can not be directly adhered to. The label is rounded to make peeling off the white release film of the pads easy. If you want to use it on the dashboard, first peel off the white release film, then stick the glue to the mounting disk or base, then use the other white side film to stick the dashboard. Press down for a few minutes to increase the contact of the glue. Wait 24 hours to use. They take care of all quality-related issues. They provide a 100% satisfaction guarantee.

Brand: Galundge

👤This helped me fix my dash cam and now it sticks to my car. It's easy to install and it's self explanatory. If your pads will no longer stick to your car, you need this. The price allows you to fix 9 pads.

👤I bought this to replace the one that came with my phone mount. My phone mount was not held by these.

👤3M pads are advertised. I didn't intend to use them, but I did anyways.

👤It was used for a cell phone holder. Working well. The product is great, but it is small.

2. Silicone Dashboard Universal Smartphones Compatible

Silicone Dashboard Universal Smartphones Compatible

It's compatible with most of the different sizes of phones in the market phone holder car. It was placed in the center console of the car to give it a good angle. The car cell phone holder can be used to place other items in the car, such as glasses. Cell phone car mounts can be used in other places. The car mat for phone can be adjusted to fit the phone size or the way of placement. Horizontal placement will be more stable than vertical. There may be a little slide when you take a sharp turn. The anti-slip pad on the bottom of the phone stand makes it safe to use the phone even if you take a sudden turn. Professional after-sale customer service is covered by the quality warranty. If you are dissatisfied with anything, please contact them. Their ultimate goal is your satisfaction.

Brand: Showvigor

👤There is an update Beware. They are holding you hostage for a five stat rating. Don't use a gift card for generosity. It doesn't happen! It's attractive and you can leave it on your dash all the time. It holds our phones in a wallet type of case. I would suggest that they make it so that the base rotates so you can change the angle of view. The reason for the four star rating is that. We would buy it again.

👤It has a low profile when not in use. I have another one that doesn't have a cover and my phone gets very hot, but this one keeps it cool and in a place where it is visible. I can easily adjust the location because it does not move. It works well with different size phones and can adjust the angle.

👤The clam shell seems to work well to hold the phone if you can find the right spot to put it on, but you can't verify that. If your dash is flat, it may work, but if it is rounded, it won't. The pad is small in the middle and can't grab on a surface that is not straight. It slides around.

👤I really wanted to like this but it sits too high. I don't know how other vehicles are built where this can sit on a lower surface. The only place for this is on the dashboard center of my Jeep. It is out of reach here. I was hoping that the angle it was sitting on would give me a better view of the screen, but alas, I don't have a good view of it from this location.

👤I was hoping to put this in the flat spot on my dash. Even with a slightly bulky case, it will hold my phone. No force on this earth will hold it to my dash. I don't know what the rest of these reviews did differently, but I'm going to have to purchase some 3m strips to have any hope of not flying off on a turn.

👤It is a quality product and easy to install. It is out of the way when not in use.

👤It does rattle the lid a bit when you go over bumps. It's not really annoying but still wishes it was more quiet when not in use. It does work well if it isn't.

👤I was looking for a mount that was not obtrusive. After ordering and returning a few, I settled on this one. It is what I am looking for. A nice, sleek appearance that almost appears to be a part of the dashboard when not in use. I hope that it stays power for a long time, but for now, I love it.

👤Even though the dash isn't too flat, I sit on it nice and securely. Doesn't move when driving.

👤It is exactly what I was looking for.

👤Kleinwagen, the 500, also "nicht viel Platz". "zum Einkaufen fahren", "in die Arbeit fahren", "zum Auto", and so on. Is it possible that I was keinesfalls? Rckseite des Handys, im Auto, Saugnapf, an der Windschutzscheibe Habe, verglichen und lange gesucht. Ihren System was fr das "Klammerhalterung" die ber dem Tacho. Zwar alles schn im. Ich kein brauche, mchte Ich hier, so wen uns doof aus. Ich fand die Anordnung dafr in the car. "Sehr weit" weg, bei der Anbringung. Ich ist die Halterung dennoch dran, aber der Gedanke ist es. Davon ist die Heizungswrme bzw. Is the Sommer Klte von der Klimaanlage bekommen? Is unbedingt verdeckt? Eher... Ich hatte in meinem letzten Auto, aber I fand es. Im Sommer finde die Flle empfinde, die schner und weniger strend. I am besser. Getrnkehalter was besetzen und besser, so he was irgendwo” in dabei. Ich war in der Situation, wegen die schlecht beschilderten Umleitung zum Navigieren brauchte und war gespannt. The Handyhalterung hielt was verspricht. Sogar bei aus dem Feldweg kein wackeln, rutschen der Halterung und des handys. Ihren Bedarf rausgekramt ist immer, ist irgendwo. Ich ist das flachen, aber dennoch groen, und das Ich ist das Handyhalterung. It's dem. Foto ist man den Handy-Halter. ja kein Foto macht knnen.

3. Dashboard Suction Mounting Adhesive Universal

Dashboard Suction Mounting Adhesive Universal

This disc dashboard pad is made of strong and strong plate and can attach onto your car and your devices firmly, so you don't have to worry about them flying off as you go round corners. The dashboard mount disk pad is 86mm/ 3.4 inch in diameter and can be applied to any suction cup accessories that are less than 80mm/ 3.2 inch. Make sure the target place is clean and dry, then remove the protective cover on the base of the disk, press the disk down onto the dashboard and make sure it is tight. The mounting disc can be used to mount a wide range of objects, but only if the mount is 80mm or smaller. You will get 8 pieces of dashboard mount disc in one set, sufficient quantity to meet you daily using and replacement needs, which are thoughtful gifts for family and friends.

Brand: Bbto

👤The lip on the edge limits the size of the cups you can use. I don't understand why they weren't just designed flat, as I don't see a benefit to adding a bump on an otherwise smooth surface.

👤It is easy to use and stick to things. I had a problem with it peeling off of my dash and taking my gps stand off of it. The disk came off of my dashboard and was not able to be used again.

👤I have an older gps that I have never been able to mount in a safe place. It wouldn't work on the windshield, but at an odd angle and out of reach if I needed to check on another screen for detours, traffic alerts, etc. I can put it on the dashboard where it won't obstruct my vision and it's easy to see. I can mount my camera with the same disc.

👤Doesn't work. I used warm water and alcohol to clean the dash. If you don't use it as intended, it stays in place. It fails as soon as you put any weight on it. The best I could get was a few days before the problem occurred. The sticky pad doesn't conform well to textured surfaces.

👤It's normal for anything with a cup to fall off. They were stuck in the location and wanted a device to make sure it was there. These work well. There is no more device falling of the window. These work well.

👤The 3M tape is too small to spread out on the edges of the desk and it does not adhere very well.

👤They work well. I had to use super glue to hold them to the dash when I used a larger mount. The glue does its job. Would buy again.

👤The phone holder stays in place once you stick it on the disc, but as soon as you put your phone in the holder, the whole thing comes off the dash! It's a waste of money. Don't buy! The reviews should have been read first.

👤The phone holder can be put on the dash rather than the window. The glue is strong enough to hold it securely, but also not hard to remove, and doesn't leave a permanent mark. I put one in the wrong position and had to remove it. This didn't come off when the satnav was put on it. I would recommend this to anyone who doesn't have enough mounting space in their car.

👤If you have a textured dashboard on your car, the suction mount fitting may not stick if they are not brand new. I am happy with them so far, though they would help.

👤The phone holder and Tom Tom Pro do not fit on the pad. It's a shame because getting pads back is a task if not done quickly. I have binned 6 others because they don't use me.

👤These are great. I used mine to hold my phone on my dash board. I have extras if needed in the future, but I would rather not have so many. Thank you!

4. Dashboard Mounting Adhesive Windshield Navigation

Dashboard Mounting Adhesive Windshield Navigation

The dashboard sticky pad is designed to solve the problem of suckers falling off. Pop-Tech sticky mounting disk is 95mm in diameter. There are many things like a dash cup phone mount, a cell phone holder, a gps navigation bracket, a car tablet stand, a wireless charging base, and a radar detector. The cup mount plate is suitable for a slight curved and textured surface of the vehicle. The disk can be firmly stuck to the dash. The 3M VHB Enhanced version of the bottom glue is 40% stronger than ordinary ones. The dashboard sticky disc is heat resistant and can hold the auto phone holder at a high temperature of up to 120 degrees. Installation steps are easy to set up. Attach disk, clean surface, and wait 24 hours. The alcohol pad is provided for convenience. The upper part of the plastic plate has a smooth and flat surface. Wait 24 hours after the 3m vhb dashboard pad mounting disk for better use effect. Each pad is only used once. It may not be able to be moved once attached. If you want to transfer its location, use a new disk. Allow 24 hours for the glue to cure to the surface before applying the item. Don't touch the glue with your hands. If you peel the cover paper too fast, it will stick with glue, which is too strong. 2 x 95mm Disk, Dashboard Pad, 4 x Alcohol Pack, 1 x User Manual are included in the package content and Satisfactory Service. Pop-Tech selects high quality material. They provide a 12-month Satisfactory After-Sale Service and lifetime technical support for buyers. If you have a question, please contact them and their customer service team will be happy to help. They want your satisfaction.

Brand: Pop-tech

👤The shower wand holder wouldn't stick to my tile. My wife is too short to reach the shower head holder. This solved the problem. Been well for a couple weeks.

👤Cleaned the dash with a general purpose cleaner. The dash of my truck was clean. The temperature outside is about 70 degrees. All should have been fine. The glue did not work. It was as if it had been there a long time. The disks were useless.

👤This was easy to install and is holding up well despite the sun exposure.

👤nada se mueve vale la pena aparte de un excelente

👤It was easy to use. The glue was in place. As needed, it worked.

👤It was very easy to install. It feels like it's fused to the dash of my car, so I don't plan on removing it. Excellent job, I would recommend it.

👤I bought these for my camera. The 3M tape is amazing. Not coming off. The price is great.

👤I would like to return this. I'm extremely disappointed that it doesn't work and won't stick in my dash. Adding gorilla tape was thought to be just the lack of stickiness. No, huge nope.

👤The cup on my dash cam wouldn't fit in my window. These helped keep my camera up. I recommend! If my picture is not clear, I apologize.

👤Just make sure you follow the directions and wait, it's still holding on great, just bought this almost a month ago.

5. Bracketron Universal Windshield Smartphones UFM 100 BL

Bracketron Universal Windshield Smartphones UFM 100 BL

The weight of the gps daemon mount. The Nav-Mat has a mounting base that can be used to convert your device into a dash-mounted device. Transfer to other vehicles and use it to secure your car gps holder or other device mount, hands- and hassle-free. The diameter of the disc is 3.5 BEANBAG BODY & ANTI-SKID BASE. The anti-skid underside prevents device sliding even during sharp turns, and the body of the pad is shaped to your dashboard. It is compatible with most factory mounts, and can hold devices weighing up to 1 lbs. Whether you need it for a professional truck-driving route or on an extended road trip, the portable car accessory can be taken from vehicle to vehicle. It is easy to remove and hide your electronics when you are done. Easy installation. The only thing you have to do is wipe down the dashboard to make a clean place for the Nav-Mat. There is nothing you can do to stop your view. It is a great accessory to have with you. Stay safe and connected with their mounts and accessories, which are designed to keep professional drivers and casual commuters connected. No matter what kind of device you use for travel, they have a variety of products that are easy to use. Works with most stock Windshield Mounts. The anti-skid base holds up to several pounds.

Brand: Bracketron

👤I was having trouble getting a gps to work in my car. If mounted with a cup, the windshield was too far to reach. There is no excuse for Dodge to not put a flat spot on the dashboard area, all our other cars have them. I decided to try it out even though it was sitting on a part of the dash that was slightly sloped and appeared to be too slippery. I expected it to move forward when I put the brakes on it. I was wrong. This thing works. It has stayed in place even when I have had to hit the brakes or swerve to avoid something. It might move in an emergency, but it hasn't happened to me yet. I like the fact that I can easily remove the gps from view while parked and store it in a safe place out of the sun. When I get back in the van, I can put it back on the dash. The product exceeded my expectations. I would recommend it to anyone who can't use a fixed type mount.

👤It's a pain to take off and put it back on, but you can stick the device to the glass. When I park the car and don't want to leave the Garmin in full view, I just move the pillow and the device to the floor. When I'm ready to use it, put it back. It's easy. It's convenient and I use the Garmin a lot more now that I have this mat. My girlfriend asked me to send her the details of the one she ordered. It's heavier than I thought, but that's what keeps it from sliding. I use one small carry-on when I travel, so I probably won't take it on a trip because of the weight. This product is very good.

👤It was pleasantly surprised. I was skeptical at first, but once I put it on my dashboard, it was an amazing invention. The line of sight is better when the gps is on. It's easy to remove the whole unit from the dashboard when my car is closed in the summer. This sturdy holder is perfect for the unit I have in the Magellan Maestro gps. Just put the whole mount with the gps installed and lock it up and forget it. It's not going anywhere, it's completely secure. It all stays put. It's easy to remove the whole thing from the way, instead of having to re-attach the mount every time I want to put up a folding sun shade. I was unsure if there was enough room for the Civic to fit on the smaller dash of a compact car. It fits perfectly. I was happy with my purchase.

👤My wife and I both use magnetic mounts for our phones. I use this portable mounting surface on long trips because I use the magnetic mount attached to my console. The passenger will be able to watch videos on the trips with the support of the iPhone pro max. The bottom surface of the car does not allow it to slide on the dash. It stays stable even on high speeds and when you have to do sharp turns. The quality of the material is great. I highly recommend it.

6. Dashboard Mounting Universal Adhesive Diameter

Dashboard Mounting Universal Adhesive Diameter

3M Sticky Tapes can be upgraded to provide smooth, glass-like surfaces for car mounts. 3M PE foam can be fixed on textured surfaces. It is applicable to most suction cup gps/ mobile holders. There are no tools required for installation. Every APPS2Car product has life time customer service.

Brand: Apps2car

👤The dashboard pad is separated from the sticky pad in the heat, so it's placed on my dash. This is not extreme because it is San Diego heat. The 3M sticky pad came from the dash, but the suction pad came from the sticky pad. It works well for suction cup mounts on surfaces where the cup won't fit.

👤The Iottie Suction Cup Phone Mount requires 3 pack of dashboard mounting disks. The product is made of plastic. I put the first one on and it split in a month. The plastic disk separates from the glue on the dash. Within a month, I put the second one on. I put the third one on and it lasted about 6 months and then split apart. I didn't see any reviews that described the kind of failure that I experienced, despite the fact that a number of people said that the glue failed to stick to their dash in hot weather.

👤The dash mounting pads offer an excellent solution to mounting a cell phone mount onto a vehicle. It should hold an average sized phone. Make sure to follow the instructions and clean the dashboard surface where you are going to mount it. If you want to install the pad on a hot dashboard that has been exposed to the sun, be careful as it will not allow enough bonding since the heat from the surface of the dash will still be emitting heat. If possible, place the vehicle early in the day or in an area that has not been exposed to the sun. The cure time is three hours, but I would recommend waiting at least five hours before placing the cellphone mounting device since the cup will attach to it.

👤The cups are very easy to stick to and hold on to, and the backing on the disc is very strong. I used one on my bathroom wall to mount a mirror for shaving, and the second one I tried to use on my car, but it didn't work out. I mounted a phone holder on my car for a few days, but on the third day it fell off, it was a sunny day with a high of 75 degrees, and I was 2 hours into my drive. The only good news is that it came off cleanly, so there was no trace of glue, but the back of the disc has lost its ability to stick, so it is useless now. I thought about trying to remount my phone cradle with the third and final disc on the dash. The third disc will fail the same way the other one did, so I will just blow it up. If you are buying this for use inside your car or truck, don't waste your money, but if you are getting it to use inside the home or office, it's great.

👤I didn't follow the directions on the first two, but on the third I let it set for a week before I tried to mount my phone holder, and as soon as I put it on it pulled the pad off. I used the cleaning pads and it failed. The iOttie's pad worked but I had to remove it to remount it. The original pad was more flexible and could conform to different surfaces. The 3M type tape was not able to hold it's substance.

7. APPS2Car Dashboard Friction Magellan Smartphones

APPS2Car Dashboard Friction Magellan Smartphones

The spring lock holder will fit any 3-7 inch gps and cell phones with a unique Anti-slip Jello Block under the mount that will stick on to your dashboard and be easy to clean with water. The device stays on the dash with the help of the weighted body and anti-slip bottom. The APPS2Car Beanbag Mount is easy to attach a gps / cell phone unit to your car, and five slots allow you to adjust your device in multiple angles. One of the best alternatives to mount a car on a truck is to use a cell phone. No cradle needed! No magnets, no harm to your device! The heat made the cup fall off. There is no interference with the air conditioner or the cd player. The Nuvi 1100 1200 is compatible with the portable Friction Mount. etc There is a car mount for all of the phones, including the Note 10 9 and the S10e S9 S8 Note 9. Start 45 55 60 65 500 600 Via 1405 1435 1535 1605 1635 XXL 540 330 350.

Brand: Apps2car

👤This would be a good design for a gps holder. This thing does not stay put. I quote: " Find your sweet spot and put down the sticker, then put the unit on it." The thing will become airborne after you take a 2 mph turn.

👤I have been using this for over two years. It holds my car. I drive a 2500HD. I've never had it move. Some of the reviews say that theirs moves around, but I drive around construction sites and roll down the highway, and it has always stayed in place. I'm very happy with this. I don't move my device. On hot sunny days, the mount would fall off.

👤One needs to keep a clear view of the road ahead and to obviate the vacuum holding your gps to a windshield from failing and dropping in traffic and/or repeatedly. It is easy to move in traffic. There is a It's best to wait a while, maybe forever, from sticking it to one spot on the dash or console. You will want to take it with you to another vehicle occasionally, but you will want to change it from time to time.

👤The issues that I had with this Mount may be different to what I've had before. Is it ok for other gps models? The power cord must be connected to use the traffic detector feature of the 2455. The power switch is located at the lop left of the unit and the power cord is located at the bottom left. To allow for minimum clearance between the plug and the grip "tooth" of theGPS Mount while providing access to theGPS power switch, theGPS must be shifted to one side. The grip on the opposite side of the mount does not provide a secure grip to the gps. Photoe 3. Issue #2. There is a non-stick gel substance at the bottom of the gps mount. The bottom surface of the Mount is flat. It was difficult to find a flat surface for the non-slip gel to grip on the front console of my vehicles. A better design would have been a flexible bottom surface. As dust accumulates on the substance, gel-type non-stick substances lose their effectiveness. Positives. The design is easy to store and may be a good mount for many gps, but not for a garmin. The concept is ok, but a few changes away from an excellent gps mount design.

👤I've used this to hold my electronics. It holds both securely. I need to wash the sticky area on the bottom of the mount to remove the dust after the mount slides a bit. It is guaranteed to elicit further security screening when I take it with me when I fly and rent a car. If you want to keep your luggage and carry-on bag free of TSA, you should put it in a screening bin. They can't see through it, so it gets swabbed.

👤I wanted a holder that wouldn't require me to block an a/c vent, so I chose this one. It was easy to figure out because it works like a giant clothes pin and the gps sits securely in the ridged "mouth". It's weighted with a non-slip bottom that's about the size of my open hand, so it doesn't slip when placed on the dash. I didn't want to use the peel-and-stick pad that was on the bottom. I would rather have the option of taking the gps off the dash when it's not being used, and not leaving a sticky glue mess. It's what I needed since the windshield cup on my old gps didn't fit well.

8. Circular Adhesive Mounting Windshield Dashboard

Circular Adhesive Mounting Windshield Dashboard

6 PCS Super Strong Double Side Sticker for Car Phone Mount is a must have for any car. Excellent performance, waterproof, Simultaneous fixation and seal. The strong pads are compatible with the camera. The Double Sided Clear and Round Tough Disk Sticky Tape is compatible with the Mpow 033 car mount holder. The Long Arm Universal Magnetic Cradle is a replacement for the Dashboard Cell Phone Mount. Cut into it. If you need a certain size, you can cut it into smaller pieces. When removal is required, strong glue leaves no trace. These sticky pads can stick to a lot of materials.

Brand: Mu-cn

👤These discs are great. All of our vehicles have gps units on them. After a few months, the included mount loses its strength and rarely stays on. The discs change that. None of the units have fallen off of the mounts yet. I wish I'd discovered them a long time ago. I would recommend them to anyone.

👤These are difficult to mount on a windshield. The camera was next to the mirror. The mount on the cup has fallen off many times. Since using these to hold it on camera, it has not fallen off the window. Great product.

👤The reviews seem to be pretty good, but for me it didn't work out. I used it to put a gps note in my car. The mount was in my car for almost 2 years but eventually became detached and I needed to replace the double-sided tape. I put the alcohol pad in and then put the 3M tape in the back of the mount. It seemed to work well. I waited 24 hours before putting a phone in the mount. The tape didn't seem to adhere to either side of the mount after it was partially separated from my vehicle on one side. I don't know what I did with the rest of the pads so I can't check if it was an issue with the product or the tape. I'm pretty sure it was just the single piece based on 3m reputation and reviews, but I have to go off of the one piece I actually installed.

👤The original phone mount melted off in the summer heat, so I needed a replacement pad. I bought these in hopes of not having to buy a whole new phone mount, and was excited at first when it seemed to work, but my phone mount fell right off soon after. I tried many different pads and it wouldn't hold. I bought a new phone mount that works and hasn't fallen down. I don't want to have to buy new plastic if I can just donate it to someone else.

👤I wanted to mount a shower head in our bathroom. The old disc gave up after a decade, and this was the perfect replacement. The mount is solid and easy to apply. This is really good.

👤This is exactly what I was looking for. I need a new sticky pad. I had to cut it off because it was too big for the surface, but it was easy to fit on the surface of the car's charging port and the windshield. I don't know how easy it will be to remove, but I hope it comes off okay when the time comes. This will be useful for other reasons. I think this is a good idea. Good and powerful!

👤This won't hold a phone in the car. After many years of having it, my old one melted. Within 30 minutes, it failed. This may be good for items that are light.

👤I have a phone mount in my car that sticks to the window after a while, but it wasn't sticking anymore. I replaced the sticky parts on the phone mount. I put it back on the car and it works great holding my phone up on the mount.

9. Staont Anti Slip Silicone Dashboard Compatible

Staont Anti Slip Silicone Dashboard Compatible

The cell phone holder is applicable to all mobile phones from 3 to 7 inches. Mini -11-11 Pro-11 Plus/7/7 plus, the S8 and S8. Plus, S10, S10, Note 8, Note 9, Note 10 pro. The car phone mount can be used for phones like the IPAD, Mi, and other devices. One-handed operation, insert or remove your mobile phones, small size, is the special design. It can be placed anywhere on the car's dashboard, using a 100 degree comfort angle, which reduces driving blind spots. You can apply to SUVs for Ford, Chevrolet, GM, Subaru, Volkswagen, Benz, and KIA. The cell phone holder and the bottom plastic liner can be washed and re-used, and will not leave any traces when removed. The phone holder is made from high-tech glue and will be the same as the new one, just rinse it and dry it. The cable slot design makes the charging cable well organized. The mat holder has a good amount of space for keys, coins, gadgets and other items. It's a cellphone stand in office or home for meetings, movies, games, and more. It can protect phone against bumps, scratches, and flying out when there is an emergency braking, sudden stop and sharp turn. The double snap design of the vehicle mount will not press the volume keys.

Brand: Staont

👤I liked the product at first and it was made of good quality rubber, but now I regret buying it. I found the bottom of the glue completely melted in my car, and it's going to take a lot of work to clean it up.

👤It's a perfect solution to sagging phone holders. The holder is rubberized so it doesn't fall. I have purchased at least 10 holders and all break. This one is a winner.

👤I like this holder better than any other I have used, but I think it is dependent on the type of car you have. You need a flat area to place this so you can see the road. I don't like having to look to the side in order to see my navigation, and this keeps everything in my line of sight. Even though it is attached to a slightly rounded area, it is very stable. I tried a cup holder insert with a long arm. I had to look away from the road. The cup holders are too far away from where we should be, and the kind that makes it hard to see the road, is something that always blocks at least some forward visibility. I liked the holder for a long time, but I use my vents too much. It makes a lot of sense in my Civic, even though I thought a long time before I placed it there. I can still hear the car shift even though I am blocking my view of the tachometer, and if I have any concerns, I could remove the phone to see what is happening.

👤Reality sinks in once you start using this product, it seems like a great idea. If you don't need a full screen, but still want to look at your maps at the same time, this might not work for you. It takes some getting used to and most of us are familiar with the things you have to do without on a reduced screen. I will most likely use a full size upright phone holder the next time I have to buy a replacement.

👤I was surprised by how small it is, but I was impressed with how well it works with my phone. Some reviewers said they couldn't use the device with the phone case on. I have a phone in a Silicone case and it fits perfectly. I ordered another one for my husband because I am very happy with this device, but I don't understand why I have to pay for shipping when I already have other items on my new order. If I have to pay shipping, I will cancel the second order.

👤Sits in the car. It may be affected by heat. So far, the sticks are ok. I like it over vent mounts. It's easy to place or remove the phone. The phone seems to stay in place. There is no need for magnets or glue. Depending upon placement, can obscure the view.

10. Adhesive Replacement Dashboard Windshield Stickers

Adhesive Replacement Dashboard Windshield Stickers

The selection of high-quality Genuine 3M adhesive pad, double-sided self-adhesive, provides strong and durable support, high/low temperature resistant, stronger than ordinary glue patches. The plastic plate is compatible with the dashboard and dash cam holder. Let your hands go. It's suitable for clean and flat, and some textured or wet surfaces in the kitchen. There is a dual suded round glue that works on the dashboard, metal, and handsoaps dudel dispensers. It's widely applicable. You can cut it to fit your device. Easy installation. Simple installation steps can be completed. It can be easily removed and cleaned. 100% Satisfactory Service Lifetime technical support is provided for the best after-sale service. If you have any questions about their product, their customer service team is available to help you 24 hours a day. They want your satisfaction.

Brand: Pop-tech

👤This patch is easy to apply. It said it would work on textured surfaces. It doesn't. I have used alcohol wipes and they still lift right back up. It's almost like those rubber sticky toys you flung against the walls as a kid to watch roll down, not the actual glue patches or command strips. I got it for a dash mount cell holder. It falls over if I try to put my phone in the clip, because it rocks when I look at it wrong. They do not work on textured surfaces like they claim.

👤I used one of these for my Ventrue dash cam because it would fall from my car. It has been 3 1/2 weeks since it was attached to the glue. It's only a small gripe that you have to stick the window like it is and not touch it for 24 hours to make sure the strength of the glue is maximized. It's gotten the job done so no complaints from me.

👤The device was in an old car. When the last was removed, this worked well.

👤I have a small car. The original glue was melted by the Texas summer heat. The sticky pad is amazing. I cut it to fit my small device and it has been sticking to the windshield ever since.

👤These help a lot to your dashboard or rear window.

👤It is very sticky that makes the suction strong.

👤I've used this for 3 different cars and 2 of them fell off. Very disappointed.

👤Je l'ai utilisé pour coller un long pommeau de douche. Cette ventouse ne tenait jamais. Problme. Le paquet vient. Je recommande.

👤The item arrived on time. I was able to modify and use the wrong size. So far, so good.

👤It was easy to install and held after a week of -20 to -30c. Will have to see if it takes 50c this summer.

11. AmazonBasics Dashboard Magellan Portable Navigators

AmazonBasics Dashboard Magellan Portable Navigators

Attach a gps unit to your dash with the Amazon BasicsGPS Dashboard Mount. The bottom of the gps mount is anti-slip. The mount can be used on most car dashboards. It is necessary to hold the gps in place. All window mounts are compatible with the Amazon Basics 1-year limited warranty.

Brand: Amazon Basics

👤There is a sticky silicone disk at the center of the mount, but it is not clear from the description. The disk is covered with a film. The mount will slide on the dash if you leave the protective film in place. If you remove the protective film, you expose a sticky surface that is designed to adhere the mount to the dash. Not what I wanted. I removed the silicone disk. It took a bit of effort, but it came off without a hitch. The mount doesn't slide around when the disk is removed, and the bottom of the mount makes contact with my dash. I thought I was buying the mount in the first place.

👤The price was good, but it was on the dashboard. They need to make it better. It won't stay in place. This could be better than Amazon trying to make their own brands. Who wants navigation to fall off the dash on simple turns?

👤99% of modern dash material is textured dashes, which is why the suction cup dash mount for the cameras from GoPro doesn't adhere to them. I needed an alternative for my low recording car camera. The bean bag gps mount is an excellent alternative. Within 24 hours, the base holder was cured and attached to the dash mount. There are negative comments about the mount. This wasn't an issue. The device has three heavy bean bag arms with two cellophane covers on the bases, just peel them off. I cleaned the base with alcohol and dried it to make sure the camera holder was attached perfectly. The bottom-side of the mount that goes on top of your car is sticky once you remove the cellophane. I use a lint roller to remove debris. The cool thing? I can just pick up my camera and move it to any other car I want. If it works for my camera, it will work for the original intended use of the device. I don't have any complaints.

👤I love this! It keeps the gps in place. I had issues with the gps falling on the floor when it got stuck from the window. The heat in the car is a problem for me. I had an issue with the gps coming off and falling to the floor, but the stay put on the dash does not slide. I had to put double sided tape on the gps to keep it from coming off but it was not due to the mount but the heat.

👤After I removed the plastic film, it's sticking very well and I'm very happy with my purchase.

👤I thought the Amazon car dashboard mount was a great solution to avoid putting sticky pads on my car dashboard, since I bought a nice phone holder. The anti-slip bottom doesn't work well, and the mount is not a friction mount. There are any mounts you want to attach to it. The price is affordable. The product looks like a mount, but it's not. There is a sticky silicone disk in the center of the mount. You need to remove the protective film. There is a The bottom doesn't work well. I was driving and the mount slid around on my dashboard. I didn't remove the protection film on the sticky silicone disk because I don't want to have sticky marks on my car. There is a The weight of the Amazon dashboard mount is not heavy enough to hold the mounts, so they can't be too heavy or long. The dashboard mount tilted even if I used the sticky pad on the bottom of the phone holder. I decided to buy a portable friction mount from a company that is heavier than the one on Amazon. It's more expensive than the Amazon one. It's a truly friction mount, and the anti-slip bottom works well. I can put it on a non-flat surface.


What is the best product for gps mount pad?

Gps mount pad products from Galundge. In this article about gps mount pad you can see why people choose the product. Showvigor and Bbto are also good brands to look for when you are finding gps mount pad.

What are the best brands for gps mount pad?

Galundge, Showvigor and Bbto are some of the best brands that chosen by people for gps mount pad. Find the detail in this article. Pop-tech, Bracketron and Apps2car are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to