Best Gps Mount for Motorcycle

Mount 3 Feb 2023 10+ Comments Open

1. Aluminum Handlebars Tool Free Installation Handlebar

Aluminum Handlebars Tool Free Installation Handlebar

The 17mm is 0.67''. The ball handlebar mount has a diameter of 1.26''. It is tool-free and easy to install or remove. The rubber ring inserts give the set a snug fit and protect the mounting surface. The rubber ring pads have a diameter. The mount ball base uses rubber-insert and locknuts to prevent high vibration for mounting to motorcycle and bike handlebars as well as other round rails within the stated dimensions. The handlebar ball mount is made of aluminum and is reliable in demanding environments. The ball has anti-slip performance. Only compatible with 17mm. The ball sockets have mounting pattern brackets. Not compatible with the ball sockets. Works for the Nuvi and Drivesmart devices. Also works for phone mounts for motorcycles, as well as for RAM Mounts. It's suitable for installation on bike, bicycle, motorcycle, stroller, mountain bike, dirt bike, trek bike, road bike, golf cart, electric scooter, ATV, etc.

Brand: Kewig

👤I tried to pull the mount off the ball, but it didn't feel any wind or see any miles, but I will update if the mount does.

👤Me parece increble incluso, soporta el iPad Pro de 12.9 con mucha facilidad.

👤Works with a golf cart. The handle bar is nearly perfect in diameter. I use it to setup a mount.

2. Garmin All Terrain Motorcycle Ultrabright Rain Resistant

Garmin All Terrain Motorcycle Ultrabright Rain Resistant

The display is built rugged and passed the military standard for drop test. You can get spoken turn-by-turn directions through your connected helmet or headset. Direct-to-device downloads and no annual subscription are available for BirdsEye Satellite Imagery. There are options for riding on curvy or hilly roads. You can easily manage and review routes, tracks, and waypoints with the help of a navigator. You can record your route with the track recorder and save it for future adventures. You can access live traffic and weather, share routes with other riders, and get phone notifications with the Garmin Drive app.

Brand: Garmin

👤I don't know how many gpss I have used on a motorcycle. I think it's around 10. The motorcycle specific Gps are the first I have tried and they are too small for my liking. I have had it for about a year. My actual use has been limited because of the lack of appeal to ride in our Florida heat and humidity. There are a few observations about the screen. Even in direct sunlight, it is bright and readable. It's better than any of the previous ones I've used. Big plus! The data fields are easy to read, and the speed indicator glows red when you are speeding. The screen on the gps is glove friendly. Maybe this year I will be able to escape from Florida. The screen is a perfect size. The last 3 gpss I used were massive trucks. Big, easy to read, and extremely competent, but bulky. The larger, dimmer screen on the others is not as bright as the brighter screen on this, and the smaller overall size fits into the dash area better. Another plus. The Zumo is impervious to rain. The automotive/truckGPSs I have been using were not up to date. It's nice to no longer worry about the gps getting wet. The standard 1” ball mount was used for the gps. There is no need for special cradles or adapters. I decided to use the previously installed Ram ball and a 6” arm I already had in a big box of extra Ram stuff instead of using the bar mount and arm. The included dock/mount seems to hold the gps in place. You can remove the gps in a split second if you push a button on the back. The cable stays with the mount. The rubber cover for the contacts is included when the gps is not installed. Installation is very fast. Simply clip it back on. It's great if you have a place to securely store the gps. Some people may think that a thief can push the same button and walk away with your gps. The wiring was easy to follow. You need a negative and positive wire. I don't have to worry about messing with the gps because my car is wired to a hot-all-the-time circuit. The map retains detail when you zoom in, which is something I believe will make this gps more useful than any of the newer gpss I have used. I don't follow a pre-determined route on the bike. On the bike, I usually wing it, with only a general idea of where I'm headed, using the gps more as an electronic road atlas than just blindly following a route. You can still see the secondary roads with the map detail turned all the way up. Secondary roads are usually disabled above.3 or.500 miles. If you want to know where that little road you are thinking of exploring goes to, you might be able to see by zooming out, instead of having to scroll around and lose perspective. I prefer to adjust the zoom level myself when underway. The auto zoom seems to work at a useful level so far. I will try it. Time will tell... I just set it manually because I got tired of it zooming in and out on it's own. For the first year that I had this gps, I had a problem with how it handled points of interest. For the uninitiated and non-geeks, custom points of interest are lists of locations that may be of interest to you that would not normally be included with a gps's factory installed POIs. They can be a collection of stores or a collection of stores. The lists can be downloaded from a website, or you can make your own if you want to. The custom POIs were only accessible by digging into the menu system on the Zumo XT. A top level search didn't include custom POIs. I could live with that, but the worst thing for me was that there was no way to make the custom POI icons on the map. It's always nice to look at the map and see if one is close to something. The unit started showing custom POIs after the system update. "Up ahead" in the map settings menu must be checked to show your POIs. This will show the system icons for fuel, restaurants, and motorcycle related POIs, and it can make the screen a little busy, but hey, I'll take it. Speaking of POIs. I have found the pre-loaded POIs to be very inaccurate and frustrating to use. They have sent me on wild goose chases to businesses that were either notexistent or somewhere else. A big deal in a large RV is a frustrating annoyance on a motorcycle. Because of this, I stopped using Garmin's POIs a couple of years ago and now use other alternatives when searching for food, fuel, or anything else. Really? They could be better now. I don't know. I have been burned so many times that it will be a while before I try to use them again. I let the gps show me the nearest gas station for the first time since I owned it, against my better judgement. We went after it was shown to be close to us. I passed a gas station on the way that the gps didn't know about, and it took me about 5 blocks further up the street to a run down old building that was probably a gas station in a previous life. We were checking out an RV park for a future trip later that day, and I let the gps search for nearby RV parks on my phone. It didn't know that the RV park was established. The bottom line. If you need to find a place, don't use the POIs. You can enter the address into the gps by searching for it on your cell phone. The weather radar is connected to your phone through a wireless connection. I haven't had any showers that chase me around yet, but it all seems to work if you have a good wireless data signal. This feature is really cool. I have only used it for short trips, but if it's like any of my other current ones, they will find the address and you can be pretty confident they will get you there eventually, but will also sometimes choose strange routes. Always take a quick look at the proposed route, and always choose common sense over what a gps tells you. This thing is expensive. It's very expensive. It is the most expensive non-marine gps I have ever purchased. I would buy it again in a second. I still think it's great and would not want to be without it. As time goes on, I will probably update this review.

3. Waterproof Extensible Motorcycle Adjustable 360°Rotation

Waterproof Extensible Motorcycle Adjustable 360%C2%B0Rotation

The bike phone mount is fully enclosed and professional waterproof tape is used at the fitting place to provide IPX4 level of waterproof performance. No need to worry about damage to your phone when it's raining or snowing. The bike phone mount fit any phone within the range of 6.7" screens. It works well with the following devices. Their bike phone mount with open-face design gives complete access to all buttons and inputs of the smart phones without blocking your face ID. You can't hold phone in hand while riding. You can freely adjust the bike phone mount according to your viewing angle, Magnetic design and premium material box design keep your phone sturdy and secure. There is a bike phone mount to fit handlebars from 0.86 to 1.1 inches in diameter.

Brand: Loyife

👤This is a small gym. Mounts are easy to climb. I've had it for 2 months and it seems to be water resistant. The phone is on in the middle of the day in the second picture. The cover piece could be a bit clearer with less glare. The hardware used to be locked in place.

👤I bought this for my motorcycle and it works perfectly. I was worried about the bike standing up to the wind. I would never speed. It is a champ once tightened down. It's not that hard to get the phone in and out as the one that wants to catch you the most is the one that wants you the least. I had to turn up the touch sensitivity on my phone, but once done, there were no issues.

👤Excellent build material. It was very easy to install. Even with the thin film covering, the Touchscreen works perfectly. The phone is pretty secure because of the locks. It tends to tilt after riding a little while and this may be due to the road or bike vibrating. Will try to find a good position for it.

👤This is a large mount, but what I was looking for. The mounting ball is heavy, the extension arms need to be tightened constantly, and the plastic nut that holds the phone case to the mounting ball is cracked. It was a decent phone mount for a while, but it broke and would look for a better mount.

👤It works right now. Doesn't vibrate like crazy and can view maps. It holds up. Will review at the end of the motorcycle season.

👤It was very easy to setup. I didn't have enough room on the bars. The steering cap on my car works great with a mod.

👤The mount is well built.

👤It doesn't grip well. I can wedge it where it won't slip. I think it would hold better if I had a longer screw to tighten it. The glare is bad. I have to press harder for the screen to respond. It was not a bad item, but thought it would be better.

4. Arkon Motorcycle Handlebar Mount Garmin

Arkon Motorcycle Handlebar Mount Garmin

The 17mm ball mounting pattern is compatible with the nuvi gps devices. The mount is easy to install and fits on handlebars up to 33mm in diameter.

Brand: Arkon

👤I bought a new gps for my motorcycle. It had a bundle of accessories, but no ball for the handlebars. The device snaps into the back of the supplies and connects to the mount. After searching around, I had to call on the phone to get help locating the part. The part number was given to me immediately. The price is $59. A piece of plastic could cost that much. I found this item made by Arkon Mounts for 9 bucks and a couple of bucks more for shipping. It solved my problem completely. It's easy to mount on handle bars. I am glad I found this supplier. Thanks to Amazon and Arkon. When shopping around, it's a good idea to go to Amazon first. I have never been disappointed.

👤I attach my gps to my motorcycle with this. The device fit a bit loose than attaching to the mount in my car. The device was placed on the ball so it wouldn't be read. The mount was adjusted so that the device could be read while I was driving. The device detaches and falls off when hit by a small amount of a small amount of a small amount of a small amount of a small amount of a small amount of a small amount of a small amount of a small amount of a small amount of a small amount of a small amount of This happened many times on the ride. If a device falls off the mount, it hits the dashboard. There's nothing underneath the handlebars to catch it on a motorcycle. The power cable held the device until I could get it stopped, but this should never happen to me. I'll be looking for a new attaching device for the bike.

👤It worked well with my Nuvi. Attach the brackets to the handlebars. It seems sturdy. The dash mount that came with the Garmin had a ball sockets receiver. Pops onto the ball sockets. I would have liked it to be a little tighter, but it fits just like the ball and sockets. I thought I was fine on my first ride. I will probably get another to put on my wife's bike so she can use it too. Good price for a well respected name.

👤The mount is strong and works well on my Suzuki. The ball mount is small and the angle makes it easy for the gps to pop off when it is not being driven. There is an easy fix. Limit how far it can rotate so that it doesn't drift and keep it from popping off. The orange ring works well. I have to find something that is not visible. They could provide a wedge. The materials are of good quality.

👤Hold the bar securely on my mountain bike. I would like the PHONE mount to hold this item as well. It takes a lot of force to get the screw-on piece to hold the ball on the Arkon. After having that come loose and then the phone go flying off a couple times, I had to use a piece of pop-on screw-tight piece that grabs the ball on the Arkon mount, and then use a piece of Velcro that wraps around the top and lower side of the phone Even if the phone holder loosens from the ball, the plastic nut that tightens against the ball should be kept in place. This keeps the nut tighter to begin with, and prevents it from falling completely off. I have used it on my road bike for a couple of years and now I have a mountain bike and I am using it as well. I had to mount the bars on the mtb, but it works for me. I don't have to dig the phone out of my pocket every time I need to answer a call or change my earphones as I ride.

5. Motorcycles Charger Navigation Hayabusa Kawasaki

Motorcycles Charger Navigation Hayabusa Kawasaki

Four brackets to fix the phone, rubber bands to fix the corners of the phone, and a Creative X type grip design give a super strong grip. The mobile phone is protected from wear by the soft rubber material. The phone holder has a charging port. You can charge the mobile phone by connecting the charging cable to the motorcycle. The navigation can't be used because the phone is out of power. The ball head joint has a locking system for a landscape view. You can find the most comfortable perspective. It's suitable for most phones with a width of 1.75 "- 4.5" and a height of 3.25 "-5.5". Such as for the iPhone X, XR, 8/8 Plus, 7/7 Plus and the 6s. Plus, for the S9 and S8 of the SAMSUNG GALAXY S9 and S8 of the S7 of the SAMSUNG GALAXY S9. And etc. The motorcycle brackets are compatible with the 16mm-19mm holes. For Yamaha YZF R1M/S R6 R6S, for Kawasaki Ninja 400, for the BMW S 1000RR, for the Suzuki GSX 1300R Hayabusa, for the CBR 250R 300.

Brand: Boyimu

👤The stem doesn't stay in the tripple tree and it doesn't fit a CBR 600 F4i. I had to make an additional plug to make it work. If you don't want to make extra hardware to make it fit, it's not recommended. The description and compatibility were incorrect. The seller was very responsive and professional when he reached out to me. Great experience.

👤The 2020 Ninja 400 does not come with a wide sleeve that can grab the inside of the stem, so you cannot insert this all the way down the stem. Unless you raise it about 1.5” where it is no longer flush mounted with the stem, it doesn't fit. The gap at the bottom in the photo is not a huge deal, just took a lot of work to get it there, and it seems as though it fits a Ninja 400. You can make it fit in a variety of ways, but you won't get a flush mounted fit in the center stem of a 2020 Ninja 400. The back and fourth play on my phone is not good on a motorcycle. The bolt is tight, but it still wobbles a bit.

👤I was hoping that the mount on my 2020 GSX-R750 would work just as well as the name brand ones, but I was proven wrong. I experienced a lot of vibration when the clamps came loose, and I was on the bike. I had to make adjustments and tighten the clamps every time I stopped. I didn't have a chance to use the charging feature. I didn't want to hook it up until I was sure it was stable. The ball broke in half, making it useless. It happened while my bike was parked, which saved me from losing my phone and mind while riding. It would've been a bad day for me and everyone around me. I tried to save money, but it was not enough. I was unable to get a refund because the 30-day return window had expired. I threw the money into the trash. I sucked it up and spent the money on an overpriced phone mount, but I feel a lot less stressed about the possibility of seeing it break all over the road.

👤I looked at ordering the "RAM" brand, but reviews were hit and miss, depending on the motorcycle used on, and it didn't have a charging port. I narrowed it down to this mount because it fit my Hayabusa perfectly. The mount fits into my yoke and there is no movement unless I want it to move. It took 15 minutes to run the wiring after it was mounted, some of which was removing fairings. No complaints so far.

👤It was hard to find a phone mount for my Ninja 500 bike. I decided to try this one and it works great. The base of the phone mount was lined up with the hole in the bottom of the handle bar. I used the silver bolt that came with the phone mount to send the bolt all the way through the hole after I cut off a portion of the base. Be aware! The phone mount base will not line up without a portion being cut off.

6. TAKPART Adjustable Motorcycle Compatible Kawasaki

TAKPART Adjustable Motorcycle Compatible Kawasaki

It's suitable for installation on bike, bicycle, motorcycle, stroller, mountain bike, dirt bike, trek bike, road bike, golf cart, electric scooter, ATV, etc. Application:GPS, phones, mp3 players, camera, etc. Fitment for different types of motorcycles. For Suzuki Gladius 2009; for Suzuki DL 650A 2015; for Suzuki GS500 2001-2002; for Honda; and for Yamaha. The package includes a motorcycle tank mount kit. The package includes a motorcycle tank mount kit.

Brand: Takpart

👤I bought it for VFR1200, but it was not large enough. The monster 1200 was where it fit. Not returning it. I think I should.

👤Doesn't fit the ninja 1000 gas tank cap.

7. RiderMount Waterproof Motorcycle Motorbike Handlebar

RiderMount Waterproof Motorcycle Motorbike Handlebar

It's easy to juggle when you have a comfortable hand grip. Sunshade is where the Integral was built. Well made case with waterproof zip. There is a cable port on the bottom edge. The internal dimensions are 6.3 x 3.75 x 1.5. The mount has a ball. The mount has a ball.

Brand: Ridermount

👤It was easy to install, cover my gps, and with the gps inside the case pushing the different screens is still easy. The plastic screen works well and I was a bit wary of being able to see the screen through it. It doesn't shade it all the time, but with the big visor it is easy to see good when you put your hand over part of it. I need to open the case to turn the gps on and off. The mount of the gps is plastic and you can only tighten it so much.

👤My Tom Go is perfect. It's easy to install. While riding, remains stable. Ignore the screen on the gps and the lighting in my garage. I have two of these, the 4.3" and the 6. The mount reduces the 'glare' issue almost completely. The gps is dry in wet weather. They are mounted on Harleys. I have no issues with the mounts remaining stable.

👤The case tends to fall when mounted on my motorcycle handlebars. I am afraid of tightening it to where it might snap because it doesn't stay tight. On rainy days, clear plastic fogs up and can't read the screen. I can't see my screen on bright sunny days. The side shade panels don't fit my phone.

👤Works great with my navigation device. The cover has a touch screen. There is some room left. I'm only 2 out of 3. The sun shade works well.

👤Well thought-out and well-built. I wish the plastic screen cover was more resistant to glare. The screen is not usable if the sun is over my shoulder. I know there are no perfect conditions outdoors, but I think it would help some. Still, a good purchase.

👤The product was exactly what we were looking for. We don't have to use the gps at all, just tap the plastic on the cover and it will work for us. It has held up well on very rough trails. The waterproof feature is needed on the atv trails.

👤The sun doesn't always cooperate with the direction traveled, so it's important to have a visor. I can use the touch screen through the different thickness pads that keep the screen up against the cover. The rain doesn't intrude if the zippers are down. I washed it and it stayed dry. Without a windshield, using on a XLH1200C.

👤Put it on my motorcycle. It works well. You have to check out the onscreen directions from time to time because you can't hear the audio directions. The connection seems strong. I'm very happy with the purchase.

👤I didn't want to spend a lot of money on a motorbike, and my cars already have Sat Nav, so my old Nuvi 255W was just getting dust. I didn't have enough room to fit the unit on my handlebars. I made a piece of furniture and fitted it to my bike. It runs well and can be controlled through a gloved hand, see the video. I use the bike for pleasure and it's unlikely that I'll put it to the test, but if I am unlucky I'll let you know.

8. GUB Motorcycle Aluminum Rotation Adjustable

GUB Motorcycle Aluminum Rotation Adjustable

You can adjust the width from 50mm to 100mm to fit a cell phone. Can hold up to 7 inch phones. The Sponge protects your cell phone and the metal phone mount will hold your phone tightly on the bicycle. The Bike Phone Mount does not obscure the screen, it is perfect for large screen phones. eg All screen phones include the Note10 Note9 8 7 full screen, the iPhone 11 Pro MAX, the Apple x/Xr/xs, and the HUAWEI MATE 20 pro. The viewing angle can be changed at will. The bike phone holder can be installed on the handlebars. Can be used on motorcycles, mopeds, e-bike,Folding bike,scooter, etc.

Brand: Gub

👤This product is easy to use and set up. I have it on my motorcycle. I will get another one for my quad. My phone is attached and detached in two seconds. The only problem with this item is the security feature, do you need a specialty Allen wrench to attach it to your handlebars? You can't use a standard Allen wrench to install it, you need to use their specialty Allen wrench and the one they sent me didn't work so I needed to use my grinder and drill bit to make it work I have to make sure I don't lose the Allen wrench because I may need to make adjustments once in a while. Nobody will attempt to steal this off my bike. I am sure other people have the same problem that I did. The product is perfect.

👤Thankfully my plastic phone holder failed. I decided that my next mount should be metal. I found this mount and it looks great. The mounting hardware is rock solid and was clearly designed with longevity and quality in mind. The mount lacks the rough edges and poor alignment of many items sold on Amazon. The mount appears to be designed by an engineer. The phone body is tightened with a screw mount. I secured the Note 9 while it was still in its plastic case. It was large enough to fit in the room to spare. The mount comes with one side that fits all and the other side that doesn't fit around a larger tube such as the stem tube or wider handlebars. There are mounts that can accommodate a wider tube. It would be a great improvement if this mount came with one of them. The phone cannot be tilted back or forward. It is locked in place and in orientation once it is tight. When the screen is throwing glare into your eyes, you can't adjust the tilt to diffuse the light. This isn't a big deal, and I would rather have a very secure phone mount. I give this mount 4 stars. It would be a 5/5 with a more versatile mounting hardware.

👤I bought this one because I wanted something that wouldn't snap in half at the first wreck. This is verydurable. There are negatives to the fact that the handlebars have a round connection. I don't like the idea of keeping a Unicorn tool in my bag if it gets lost, and the Allen wrench is a special one. My phone is in the carrier and it turns the volume down while I'm in it. If you have an iPhone, round handle bars, and do not mind keeping a unique tool on you for adjustments, this is a good item.

👤I bought 3 of them, one is on my motorcycle, the other is my phone, and the last one was solid and secure on my first ride. I didn't worry about my phone when I took the expressway. Highly recommend.

👤This thing works great. It fits my phone. My phone fits in the bag. Only on the circular pipe. There are multiple size rubber shims for different bars.

9. Motorcycle Charger Navigation Bracket CRF1000L

Motorcycle Charger Navigation Bracket CRF1000L

The phone holder mount is not compatible with the 12MM roll bar. The three-sided clip keeps the phone safe and stably mounted. The phone doesn't move on rough roads. The R1200GS motorcycle phone holder has ausb charge to keep your devices charged when you need them. Don't worry about your cell phone/GPS power off again while riding. The motorcycle phone mount is made of excellent plastic. The phone holder has a waterproof cover on the port. There is a gap between the phone mount and the button on the side of the phone. It protects the phone by avoiding the squeeze of the side buttons.

Brand: Mdpromcp

👤The phone is held in place by the device that holds it in place. The volume on the phone goes to zero as soon as I put it in. It looks like a good product.

👤I connected the charging cable to the BMW motorcycle navigation cradle. The phone doesn't charge when you turn the bike ignition on. Unless the seller can provide a solution, I will be returning this.

👤Excellent product. Installation is very easy and fits BMW. It charges the phone well. It requires two hands to attach and detach the phone, but would work well for any phone with a width or narrower.

👤I bought this to use with my phone. I have a slim clear case on my phone and when I put it in the mount the spring loaded arm on the bottom hits the volume button, turning the sound off. It doesn't work for what I need.

👤The gps hole is too small for a modern large phone to fit in this space. They have others with a bigger spacer that will make the phone sit out of the original cubby.

👤It works as expected. It took a few seconds to install it in the gps mount. The phone is sturdy. Makes life better.

👤The seller described the holder. I had used theusb charging device in heavy rain and it worked well. Someone broke a similar unit during a robbery attempt, so I bought a new one. It is a very good value.

👤Buen producto. Encaja perfectamente, en el soporte original del gps. Tiene un grosor aceptable. No requiere mayores instalaciones.

10. KIMISS Motorcycle Navigation Aluminum MULTISTRADA

KIMISS Motorcycle Navigation Aluminum MULTISTRADA

The motorcycle navigation brackets are specially designed for the DUCATI MULTISTRADA models, so they can perfectly match the brackets. The front stand holder is suitable for S953B, S953B, S955B, S955B, S956B, and S957B navigation, and it is convenient for you to answer calls, play music, or use the gps device. The phone stand gps mount is easy to install and comes with 4 screws. The installation can be completed without instructions. The quality of the navigation brackets is very high and they have a waterproof effect. Even in bad weather, you don't have to worry about the brackets being damaged and blocking your sight. The mobile phone navigation brackets are made from high-quality aluminum and processed by a company. It has the characteristics of high temperature proof, aging proof, abrasion proof and durability, and has a long service life.

Brand: Kimiss

11. Bracket Motorcycle Navigation 2002 2017 2006 2017

Bracket Motorcycle Navigation 2002 2017 2006 2017

The mobile phone holder is universal. For the iPhone X, iPhone XR, iPhone 6/7/8, iPhone 6/7/8 Plus. S9 is on. For Honda F5 CBR650F VFR 1200, it's a fit for most motorcycles. For the Kawasaki ZX600 NINJA. Two ways to install a motorcycle fork stem mount and rear-view mirror poles are available, as well as a sealed design with a switch and waterproof cap to make riding in the rain easier. It's easy to install and it takes a few minutes. The Triple Tree Stem Yoke Center hole has a 1.5 cm-2 cm hole. The method of expansion was used.

Brand: Siminzich

👤Comes with two pieces. One is too small and won't fit when tightened all the way. The other one is too big for the smallest setting. Does not fit a GSXR. I had to use a mallet to get the larger fitting in place. It damaged my fork and was the whole way down. It won't come back out. It's going to fall off with my phone one day. Don't buy a piece of trash. How does it not fit in the middle of a standard sport bike? I have a road trip tomorrow and didn't have time to try another type so I had to force it. Awesome. Garbage.

👤It works great. I brought my Honda 650f 2016 to the dealer and they installed it and took it out for a long ride and I love it. I don't like the rubber strap, it doesn't seem to fit properly, and I feel like it's a must have. I had to force it. I feel like it will rip because of the constant pressure on it with how it is on and as soon as it gets weathered, I will have to replace it. There is a switch inside the port that will turn it off when the battery is not being used.

👤This doesn't fit Hayabusa! The metal sleeves are too large. I had to remove the metal sleeve and replace it with a plastic tube that was the same length. The holder has a play of about 15 degrees. I don't know what the point is. If you are willing to modify it, it is a solid mount. It can be connected to your battery, but it is not a wireless charging device.

👤This is a cheaper replica of the phone mount. It is easy to install and even has an alternate clip. The dual pivot allows you to adjust the height and angle with one screw. They send you four more because it has nice rubber grips at the end. It comes with a rubber cover that goes over the phone and around the four grips to help keep it secure. The cover is recommended by me. I lost my phone. I used the product for several weeks and it worked without any issues. My guess is that the phone vibrated off because I didn't set it far enough into the grips. I think an expensive lesson was learned. The mount is better suited for phones that don't have a case.

👤It works as it should. I like this one because it has a shut off switch so it doesn't drain your battery. I am not very tech savvy. I was able to install it myself. You can charge while you ride or while your bike is off. Great product.

👤There were a few different fitting on the mount. It would fit a Yamaha fork stem, but it didn't. I had to grind down the nut to get it to fit into the fork stem and then use a rubber mallet to hammer it in, but it has been ok up to now. It holds my phone in a secure position. It has worked every time I have used it, even though I haven't used it a lot. It is an ok mount, aside from the fitment issue. It does what it is supposed to do. I received one. Some are built better than others. You get what you pay for. I will admit that it is ok for the money. If you can afford a better mount, go for it.


What is the best product for gps mount for motorcycle?

Gps mount for motorcycle products from Kewig. In this article about gps mount for motorcycle you can see why people choose the product. Garmin and Loyife are also good brands to look for when you are finding gps mount for motorcycle.

What are the best brands for gps mount for motorcycle?

Kewig, Garmin and Loyife are some of the best brands that chosen by people for gps mount for motorcycle. Find the detail in this article. Arkon, Boyimu and Takpart are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to