Best Gps Mount for Car Windshield

Mount 3 Feb 2023 10+ Comments Open

1. Windshield Universal Dashboard Suction Compatible

Windshield Universal Dashboard Suction Compatible

The switch is very strong and well adhere to your windshield. It's easy to install and no tools are required. It is possible to hold devices up to 3.54 inches for width, and it fits most types of phone. The rubbers on the clamp can protect your phone. If you have a pop sockets on the back of your phone, you can use this phone mount. You don't need to remove pop sockets if you use the clamp. The vacuum cup uses a stronger spring lock which won't break. It will stick to the window. You can adjust your phone for good viewing with a full degree rotation. It can last in the hot summer. It can't be used in the dashboard. The non- sticky cup can stick to the glass. It will work in hot weather because it will last in high temperature and the sticky cup will stop working. The iVoler update has a 6 Inches long arm and a strong car mount. For any device with a diagonal screen between 3.2 and 6.0 inches, it's compatible with the iPhone X 8 8 Plus 7 7 Plus 6 6 Plus 5 SE.

Brand: Ivoler

👤It feels apart or melted. I don't understand how this happened since it has been over 80 here before. I have not had this 2 months. I bought it at the end of January.

👤I bought this one because I lost the older model that worked so well. They changed the cup on this version, and once you remove it, it no longer fits in a windshield. I use it for CarRentals when I travel. It worked well in the first car. It stuck in the second car for a day and never came back.

👤It was very shaky while driving. The cup would fall off my car after a month. The brackets holding the cup were cracking. The brackets broke all the way around after I used it for almost three months. Would not recommend it.

👤I highly recommend this! I have had problems with the holders saying they were large enough, and technically they were, but the phone fit so tightly it was a wrestling match to get it in. Not with this one! It is very well made. It feels better to the hand than the others. The alligator clip holds the phone. The phone stays put when adjusted to any angle. I have been using mine for a couple months now, but just a week after installation a passing tractor kicked up a stone and cracked my windshield. I was worried about getting this to adhere to the new window, but I had no problems with it. It stayed put through daily use. So thankful!

👤Does not last. I have had 2 of these break in 6 months of use. The plastic broke around the cup area.

👤I love this product, it holds my phone in place, I don't have to worry about it falling down, it's simple, I ordered it for both cars. I bought two more of this product after one week, but it wouldn't stick and started falling off, so I can't get it back.

👤This product is great, but it was hard to stretch out the arm. I could use it. My husband was able to help. It is difficult to install your phone in the slot because it is so close to the cup, that is because you need to stretch out the arm. You think it might break because it is so hard to move. Pull it up until it stretches all the way out. I think the manufacturer built it that way to cut down on the size of the container. The piece that holds my phone is much more sturdy than other products I've used before. You just have to press the lever and place your phone in the slot and it will hold it in place. It works well.

👤I have different types of car mounts. For different size phones. The extra long neck makes it possible to pull it closer when I need to adjust something on my phone. My review of 5 stars was almost a year later. The sucking part came off in the summer and it was never able to stay on. The rest of the park was thrown away. Initially, I like it. It just didn't hold up for me.

2. VAZESWIN Windshield Drivesmart Driveassist StreetPilot

VAZESWIN Windshield Drivesmart Driveassist StreetPilot

The long arm mount with the 17mm ball is 270 degrees and can be adjusted from 4.53 to 6.89 inches. The mount features a strong cup with sticky gel that can be used to stably mount the gps device. The package includes one suction cup mount, wipes for cleaning mounting surfaces, and an installation manual. It's suitable for the 17mm ball mounting pattern. Also works for the car phone holder with the 17mm base.

Brand: Vazeswin

3. Windshield Washable Suction Pulled Down Compatible

Windshield Washable Suction Pulled Down Compatible

The car phone holder mount is made of aluminum and has a 9 inch diameter, which ensures the right distance between the driver and the car mount. One of the advantages of this car phone mount is that it can hold large-sized phones, so you don't need to worry about not holding your phone. While pursuing practical value, they also improve the product to make it more beautiful. The surface of the phone holder is made of a high-quality material. The real thing is more beautiful than the picture shows. The anti-skid design of the wave point is more comfortable to press, and the clip arm of the car phone holder has been slightly improved. The degree of rotation is. This car phone mount can be bent at will, and it can also be rotating through a ball head.

Brand: Beglero-shop

👤It is very stable with the mount attached to the extender. It works well.

👤The added support and the added support were great!

👤The lock button has good power.

👤I have had a number of cars broken in the past 7 months and only one worked, I have lost count. The dash mount has a sticky bottom and they give you extras. The cup works. If you have an otter box type case, the cell holder won't fit. I have a long phone and it didn't fall out while I was driving. The arm is short. I have a mini SUV that works. Would recommend.

👤It works perfectly in my SUV. I have been using it for about 3 months. It is still in place. I was happy with my transaction.

4. Garmin 010 10747 00 Suction Cup Mount

Garmin 010 10747 00 Suction Cup Mount

For the StreetPilot C500. This cup is used to secure your device to a smooth surface. Not included is the mount.

Brand: Garmin

👤Leave it to the navigator. I can't take the mount off my car because the force on my car is so strong that I can't take it off myself. The plastic lever that was used to tighten the mount fell off the assembly onto my center console. When I put the unit back in place, I noticed it had very little Torque. They have to be replaced once they break. Anyway, now. I can't remove the mount from the lever even when I release it. I would break the plastic on the replacement unit if I tried harder. I usually remove the Garmin from my car at night as the entire unit/suction cup mount and the Garmin itself were falling onto my center console due to excessive heat build up in the morning. Not anymore! ! I put the gps device in my center console storage compartment and leave the mount on the car. In the morning, I attach the gps device to the plastic ball, and that's it. The unit is much stronger than the mount that came with it. If you want to buy a navigation unit, invest $11 and buy the Suction Cup Mount from the store, as it's way more durable and tight. Keep the mount that comes with the Garmin as a backup. The replacement unit fits my device perfectly. The replacement unit will fit the part, so no worries. Thanks to Amazon for keeping the replacement parts in stock and to Garmin for manufacturing the replacement parts that naturally need to be replaced over time. I am very happy with this replacement mount. Don't hesitate to buy it. It's better than the one that came with the unit. It is amazing.

👤I had the cup for about a year. It doesn't stick to the car for more than 10 minutes. I like to use a gps device instead of my phone. I had to go back to my phone because it was embarrassing to have the gps fall into the lap of a client. It does not suck is a bad thing. Very disappointed. It's a pity.

👤This is the same version that I bought before. I'm glad I read that review. I encourage everyone to do the same. It works better than a knock off, but it costs more, so it's better to stick to the windshield. It seemed like the knock off mount would come undone when I was in heavy traffic, I don't know about anyone else. I like to use both my phone's navigation and my phone's navigation just in case the phone loses signal.

👤A year ago we bought a solar powered back up camera for our car. The original mount was not compatible with the dash and would not fit. We ordered a mount that came with a disk that you can mount to a textured surface, then mount the cup directly onto the disk. It has been great so far. The original was thrown away because it was so bad.

5. TIHOOD Windshield Holder Suction Windscreen

TIHOOD Windshield Holder Suction Windscreen

Perfect compatible with all of the gps devices that come with a pattern. The measurement is 2.2inch and the height is 2.5inch. TheBall Socket Suction Cup holds firmly on to your windshield. ExtraGPS mounts are the perfect solution for moving your navigation system from one vehicle to another with less hassle. Don't ever lose your way. This mount will keep your Nuvi gps with you at all times. Attach the mount to your car with the help of a cup.

Brand: Tihood

👤The diameter of the third-party mounts is not specified. They are too small and loose inside the sockets, causing the gps to droop. The defect for this product is mentioned by other reviewers. The seller has a list of compatible devices for my specific model of Garmin. Theuction-power of this mount seemed to be excellent. They were returned to Amazon. I will pay twice the price to try it. This larger cup is designed to provide extra-holding-power for the larger models. The actual diameter of the actual swivel ball is 17.2mm. If you want to fool with it, you can use a loose ball with a ring and a halo of electrical tape.

👤This is the second time I have had to replace this part. Is anyone else having that problem? The first one had a pin that loosened and fell off the car. I replaced it and that one fell after an hour. It's not good when you're speeding. I am happy that this came with two and so far, so good on the first one. It comes off easily. I have a back-up when it bites the dust.

👤The gps mount has a pretty powerful suction. It works well on road trips. It's easy to remove and store when not in use. I would recommend this product to anyone who would like to have an easy way to mount their gps system.

👤The mount holder works well. Most things, as well as I, do not have an amenity. The strength of the force is very good. Most of the time, the mount holder stays in place for weeks or months. When it falls onto the dash, it's not a problem to reattach. If you want to lock the cup back in place, you have to wet the back of the cup.

👤The item's spring snapped after four hours of use. The car's navigation system could have fallen in that place and caused an accident. I wouldn't buy this package again. I only gave it a one star because I couldn't give it a half star. It is very difficult to get to a drop off point to return an item in a remote area when you are on vacation, and Amazon is not helping that. Don't buy this item.

👤The Garmen's original windshield mount needed to be replaced. They will stick to the window, usually just a small amount of gling needs to be done. The ball size is too small, that's the bigger issue. The Garmen will fall out if they stay upright. I have a piece of paper in the cup to help me get a more secure fit on the second one. Quality control isn't there for the money I spend so I'm not too worried about it.

👤The cup works. The ball is small, so the device can move a bit when you hit bumps on the road.

👤I was worried that it would be difficult and expensive to replace the attachment part in our rental car, but I was able to find a two pack that is reasonably priced.

6. Vansky Universal Dashboard Windshield Samsung

Vansky Universal Dashboard Windshield Samsung

The Vansky car phone mount can be wall-mounted or clipped to your car's air vent for convenience. No tools are required for easy and quick installation. The button is easy to use and you can push it to release the phone. The phone holder for car has a rotating surface that lets you see your phone at a glance. The strong cup will hold your device steady so you can keep your focus on the road and steering wheel. The car mount can securely hold your phone between 3.5 and 7 inches. The extendable grip can accommodate a phone between 6.7 to 9 cm in width. The 3.5-7 inch smartphones and others have soft padding to securely hold them.

Brand: Vansky

👤After the first day or two, it became useless and I was really happy with this. It holds my phone for a short time but then it starts to droop. I worked around it for a few more days, trying to have it angle back as far and up as possible so that I could still see my screen, but it still drooped down with every obstacle in the road. I was expecting better. I would return it. I threw away all the packaging so I'm stuck with it. I have an urban armor gear case on my phone, for anyone who is wondering. I received a new one and it's working as expected. I recommend this product and I am very appreciative of their commitment to customer service.

👤The phone attachment will only stick to glass and it is not nearly as long as it looks in the picture. The shorter dash attachment stuck to my dashboard just fine. If you are looking for a long phone mount, this package is not right for you. The picture should be updated to reflect the actual length of the mount.

👤This is a great car phone mount. I purchased this product because I was not sure which mount option would work best for me. The mount is in a Chevrolet 2500 HD High Country Crew Cab. The only option that worked for me was the windshield mount, because my trucks air vent and dashboard are designed that way. The mount on the window appears to be very secure as I often drive my truck on a very bumpy dirt road. Since the install, it has been a couple of weeks. I gave this mount a 4 star rating because the phone release button is behind the mount. It would have been better if it was on the side to make it easier to release the phone from the cradle.

👤It was perfect. I have an outdated gps device. I only use my phone for directions, so I decided to look for something on the old gps screen. This is perfect.

👤I wanted to give an update on my review. After writing it, I received 2 product replacements. I immediately shared mine with my daughter. We are both very pleased with our phone holders. I am in love again! I would like to thank you for the replacement of my product after the return period. You care about your customers and the experience they have with the products they purchase from you and that is worth a lot of gold these days. I began using this product after I received it. My sister suggested that I do the same, so I did. After a couple of weeks, I noticed the foam cushions that held the phone in place were coming apart. I returned it because it didn't work out and got another one. I loved it until a couple of weeks ago. I put my phone in the holder while I was out driving and it immediately fell down and started swinging in different directions. I looked at it to see what had happened and noticed that the tubing that held the holder to the base was no longer firmly adhering. This product was only good for 60 days. I think I got a faulty product twice because my sister did not have this issue. It's too late to return the product, but I'm not happy about that.

7. IOttie Dashboard Windshield Samsung Smartphone

IOttie Dashboard Windshield Samsung Smartphone

Easy one touch lock/release. You can quickly mount and remove your phone with the Easy One Touch mechanism. There is an adjusted view. The telescopic arm is extendable from 4 to 6.5 inches and pivots on 260 degree arcs for a variety of mounting positions. You can view your phone in landscape and portrait modes with the rotating ball joint. Universal mounting holds phone and case combinations from 2.3 inches to 3.5 inches in width. There is a strong prediction. A dashboard disc and a suction cup combo give a powerful hold. The bottom foot can be adjusted. The mount cradle has a foot on it that can be adjusted side to side, up and down, or removed completely to hold all sizes of phones.

Brand: Iottie

👤I bought this in March of last year. It worked for a while, but then the cup started coming off more frequently. I washed it with warm water and let it dry. This helped for a while, but then the weather got warmer. There was no point in trying to put it back in place. The pad came unglued because of the heat. It was a shame that the holder wouldn't stay mounted.

👤It was working well to start. I held my Moto Z Play. It was difficult to place in a different area. I parked for more than four hours and the gum melted. It's useless now.

👤I bought the Easy One Touch 4 because of its features and price. I still use the original because it still works and nothing new has come out, so I hold the phone. The Easy One Touch 4 had only one problem, the glue coming off after a few months, but I was able to get a replacement in a few days. I buy the Easy One Touch 4 for my family and friends because of the price/ performance ratio and after sale support. I ordered the Easy One Touch 5 because I wanted to see if it had made any improvements. The packaging is the same, but the stock image shows the mount being used in a "luxury" vehicle, which tells me that the company is trying to move upstream. The packaging looks better and the color is the same. I don't think anyone cares about the packaging except for conscientious people. Every component inside gets its own bag, which is likely to prevent dust and damage to the glue. This is the best option if you want to fully seal the box. The manual has multiple languages and tells you how to adjust the magnetic charging cable holder. The pianogloss black has been removed in favor of a less fingerprints prone matt black and the push panel has been upgraded to a more subdued and less soft-touch rubber. The push panel, which is used to automatically pull the arms, no longer bears the brand name, but gains a texture. This design choice is intelligent because it lowers tooling cost and looks more premium. The rubber grips have been slightly altered to give them more grip and depth to help hold a phone securely. It is good to see that there are no issues with devices falling out. There is no reason to change what already works. The instructions state a "curing" time and temperature to mount the base and arm. If you don't follow the instructions, the glue may fall off. If you have a car that has been recalled for something like UV degradation, you may have an issue with the glue, but it isn't saying it won't work. Inside the box you will find a small black strip of rubber with 2 magnets on opposite ends, similar to a Breathe Right strip. This is to keep your charging cable from falling between your chair and center console. Everyone I've shown it to did not have any issues using it with their phone, because there is enough clearance for most phones and cases. If you want your phone to be as close to you as possible, or if you have a long dashboard, the arm has been extended an additional 3 inches. The tension mount on the back of the device has 888-270-6611 The magnetic cord organizers used to be controlled by a dial, but now they can be moved up or down depending on the phone's height. The cost increase is not worth it because you still have to touch your phone to mount it, it takes 3-6 seconds to plug in, and the cable will already be underneath the mount. I am aware of a mount that is the best in its price range.

8. APPS2Car Windshield DriveSmart DriveassistRV StreetPilot

APPS2Car Windshield DriveSmart DriveassistRV StreetPilot

This ball mount is not compatible with RV 890. Extra long gout arm. The aluminum long arm can bend up to 13 inches for various visual angles to your liking, making it easy to mount the gps on the dashboard without blocking the field of view. The gps dash mount is made of a sticky gel and a locking lever that will not come undone or slip off, and you can easily mount it on most flat surfaces. The anti-shake stabilizer is held in place by the strong sticky cup ball mount. A replacement gps holder is an alternative to gps air vent mount holder, gps friction beanbag mount holder and gps dash pad. The fit for Drivesmart 50 is wide. RV 660 760 770 (LMT LMT-S), Nuvi cam, and Zumo are all part of the LMT NA. The StreetPilot DriveLuxe Aera DriveRrack series is one of them.

Brand: Apps2car

👤The unit is not compatible with the RV. The mount is too small. Unless there is a change out ball for the mount, the unit will have to be returned.

👤I bought this as a replacement for a previous design that was mounted directly to the windshield with a short, rigid extension. The new version has a longer "gooseneck" and a better cup that grips like a vise. My initial impressions are that it will hold up, but it's not certain if it will hold up to the constant vibration and sunlight that weaken mounts over time. If you don't need the reach of the previous version, the gooseneck may be a better choice. I quickly realized that mounting my gps to the fully extended gooseneck without thestabilizer was not a good idea. At the end of the "stalk," my gps swayed and jiggled at the bumps in the road. I didn't think there was a risk of it coming loose, but the bouncing was very distracting. In my preferred mounting location, there isn't a good place to add the stabilizer, so I looked for another location where I could brace the gooseneck or the gps against something solid. I put the gps on top of the dash and mounted it directly in front of my driving position. The two points of stability provided by this may not be the best solution for safety reasons. It's helpful to have the gps positioned so close to the controls. Having a constantly moving display right in my line of sight is not good. I think the previous version was better for my needs, even though I may get used to it in time. It was long enough to keep the gps within easy reach, but off to the side where it didn't compete for my attention. I may try to figure out a way to move the mount back to the side with the bracing.

👤My car is a Chrysler Town and Country. I need a long mounting device to be used in my day-to-day driving with my gps device. Your product is very sturdy. The mounting attachment on my Garmin model should work fine even though it isn't listed in the product description. I noticed that the mounting ball doesn't snap into the back of my Garmin nearly as securely as the stanchion that comes with the typical auto units. I'm not sure if it's a problem yet, but I'm sure a good bounce in the water here in Michigan will knock it off the mount. It has solved my issue with locating my gps device. This mount has long-reach, exaggerated sloped windshields.

👤It's a great gps holder. It holds my gps very well. The ball fits well to the gps sockets and the suction is very strong. It does not come with brackets, so I give it 4 stars. If you need brackets to hold your phone, you're out of luck because it doesn't include them with it. You have to look for a different model. I only need it to hold my 7 inch gps and I am very happy with it.

9. EKIND Windscreen Windshield Compatible 010 11765 02

EKIND Windscreen Windshield Compatible 010 11765 02

The plastic is very durable and strong. In hot climates, the Windshield Suction performs well and is easy to attach with a one-touch lever. Extra gps mounts are a great solution for moving your navigation system from one vehicle to another with less hassle. A custom fit cradle for the Nuvi 50. Don't lose your way! This mount will keep your Nuvi gps with you at all times. Attach the mount to your car with the help of a cup. Don't lose your way! This mount will keep your Nuvi gps with you at all times. Attach the mount to your car with the help of a cup.

Brand: Ekind

👤To fit the clip in the holes at the bottom of the knife, you have to use a utility knife to adjust the two ridges. It was a lot cheaper than an exact fit.

👤It was difficult to get the replacement brackets onto the ball from the mount.

👤The lower part was a separate item that didn't do a good job of holding the base to the vents. The whole thing is unstable because the "legs" can't be kept close. I can't recommend to buy it. I had a similar item from another manufacturer that was so stable that it was hard to take it off from the vents. I will try to find that one and post it here.

👤It is too small. For my dog. I can try again for $6.

👤I had to disassemble it before I could fit the ball in the sockets. The compression ring made the sockets too tight. To fit the 17mm ball. Remove the silver ring, slip over the arm, and insert the ball to get the compression band back on. It was within a millimeter of returning it. At least give instructions if they are hard.

👤It works well, but in hot weather it falls off the window. I am very happy with it.

👤The information said it was compatible with the Garmin 50 LM. It did not come close. It is too small. I'm not going to send it back because it's not worth the gas. It might be ok for a large gps, but not my one.

👤It was what I needed. The gps and cupholder are in perfect condition. Came quickly.

👤I didn't really need this, but to return the item nearly equaled the cost, I was unaware that one was provided with the Sat Nav. Have kept it for the future.

10. APPS2Car Windshield Telescopic Replacement StreetPilot

APPS2Car Windshield Telescopic Replacement StreetPilot

There is an additional replacement gps mount for the Nuvi gps. Pull and push to adjust the length of the telescopic arm for easy reach. No nut to make the adjustment. The arm length was adjusted from 4.13 to 5.75 inch. The arm has a wide tilt angle. In. The long arm makes it easy to view and access your device. Press down the lever and the mount sticks to the dashboard. Before attaching the mount, the dashboard should be cleaned thoroughly to remove any dust or debris and free of any dashboard conditioners or other treatments. The RV StreetPilot 2450 is compatible with the Nuvi Drive Dzl DriveSmart Drive. 2455LMT 2460LMT 2539LMT 2555LM 2555LMT 2595LMT 2597LMT 2599LMTHD30 3450LM 3490LMT 3590LMT 50LM 52 55LM 55LMT 57 57LMT 58. 58LMT is a gps device. The RV StreetPilot 2450 is compatible with the Nuvi Drive Dzl DriveSmart Drive. 2455LMT 2460LMT 2539LMT 2555LM 2555LMT 2595LMT 2597LMT 2599LMTHD30 3450LM 3490LMT 3590LMT 50LM 52 55LM 55LMT 57 57LMT 58. 58LMT is a gps device.

Brand: Apps2car

👤I bought this mount for my Garman gps in March and have not used it since the beginning of May because the cup is not working. It was already out of its return window when it got hot. The construction of the moment Self is great, but it won't stick to the window, so I wouldn't recommend it to anyone. If they read this review and want to send me a new one that works, I will upgrade my review, but as of right now, I would give it less than one star.

👤The mount for the suction cup is a super flexible rubber, that mounts onto the rough curved surface of my dashboard without the need for the included mounting disk. I didn't want to install the circular mounting permanently, so it was great that it wasn't required. The mount has a wide range of adjustments. It was easy to adjust. The ball is in place of Nuvi 750 and Nuvi 755.

👤I used this to hold my gps device. The cup was attached to my car. It is important that the window is clean. A big rig is not as smooth as a car is. I had a problem with the unit remaining affixed to the windshield if the part was fully extended. The heat did it in. The rubber cup came off when it started to melt. I had a piece of the cup on my car. I bought this mount in January and it failed in July. I want to say that the mount would be subject to extreme temperatures if affixed to a windshield and make a better product, but the other part of me understands that extreme heat puts undue stress on anything. I will do some research to see if I can find a better product for less money.

👤I used the APPS2 Car Dashboard Suction Sticky Mount to use my gps. The ball on this mount is the same as the ball on the mount that came with the Garmin 770. The mount uses a vacuum and is sticky, so it shouldn't have any trouble sticking to the F250. The arm on the mount moves up and down. The arm can't be locked in place when it slides in or out, but it can be moved in or out. Hopefully, the arm won't have to do it on its own. When extended, the arm is more than 1.5 inches. The arm can be locked vertically with a small knob on the joint. The lock seems to work. The sticky base plate on the mount can be applied to your car dash if it is relatively smooth. The mount sticks to the smooth side of the base, which will allow you to place it on your dash. My F250 doesn't have a smooth area where I want to place my gps, so I won't need this base at this time, and it will have to stick directly to the windshield. I don't know how long the base plate will last in the sun or heat on a car dash. If your car dash is leather or vinyl, the sticky base could mar this area when removed. The mount has mounting instructions and alcohol wipes. The mount seems to be a good one, except for the question of the arm extending in or out by itself, which should be a sturdy one.

11. TIHOOD Windshield Holder Suction Windscreen

TIHOOD Windshield Holder Suction Windscreen

Perfect compatible with all of the gps devices that come with a pattern. The measurement is 2.2inch and the height is 2.5inch. TheBall Socket Suction Cup holds firmly on to your windshield. ExtraGPS mounts are the perfect solution for moving your navigation system from one vehicle to another with less hassle. Don't ever lose your way. This mount will keep your Nuvi gps with you at all times. Attach the mount to your car with the help of a cup.

Brand: Tihood

👤I lost my previous cup, but this one works the same. I hope to not lose the cups again.

👤The vehicle was turned over to the customer because I had to get to the airport.

👤It works just as well as my device. A good deal!

👤Thank you, they work very well.

👤Do not buy if you have a large gps.


What is the best product for gps mount for car windshield?

Gps mount for car windshield products from Ivoler. In this article about gps mount for car windshield you can see why people choose the product. Vazeswin and Beglero-shop are also good brands to look for when you are finding gps mount for car windshield.

What are the best brands for gps mount for car windshield?

Ivoler, Vazeswin and Beglero-shop are some of the best brands that chosen by people for gps mount for car windshield. Find the detail in this article. Garmin, Tihood and Vansky are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to