The dashboard cell phone holder is widely compatible with most types of cell phones and gps devices. Including the iPhone 11/12/11, Pro 11/12/11, Pro 11/12/11, Pro 11/12/11, Pro 11/12/11, Pro 11/12/11, Pro 11/12/11, Pro 11/12/11, Pro 11/12/11, Pro 11/12/11, Pro 11/12/11, Pro 11/12/11, Pro 11/12/11, Pro 11/12/11, Plus/7/7 plus/ 6s/6s The plus/6/6 plus/6Se/6s and the plus/4s and the plus/2s and the plus/2s and the plus/2s and the plus/2s and the plus/2s and the plus/2s and the plus/2s and the plus/2s and the plus/2 S20/S 8 pro 20 ultra. S 20 plus/ 8 plus / 9 plus 10 Plus, S 7 Edge, S7 Edge+, S7 Edge+, S7 Edge+, S7 Edge+, S7 Edge+, S7 Edge+, S7 Edge+, S7 Edge+, S7 Edge+, S7 Edge+, S7 It can protect phone against bumps, scratches, and flying out when there is an emergency braking, sudden stop and sharp turn. It's Washable and Reusable. The car phone holder is made from high-tech glue. It will be the same as the new one if you rinse it and dry it. If you want to lay the phone holder on the dashboard, you should remove the sticky film from the bottom of the car phone holder.
👤This has been in place all summer long, and I use it multiple times a day to squeeze my phone into it. It holds up well and is my favorite mount. The mounts that stick straight to your glass are worse. Before applying, be sure your dashboard is clean. I have a charging cable that I store in the little notch. It was used on a Toyota Highlander. I'm 6'1" I can see over the phone while driving. Hope this helps!
👤I like the phone holder a lot. I have a large, bulky, and heavy phone and a job that requires a lot of local driving, so I have a case for it. When I get back in my car, I grab my phone from the holder and put it back in my car. This is the first phone holder that has kept my phone in place, and it only slid under the seat. I've tried the cup holder, vent, and suction cup on the window types that have the "arms" that grip on each side and no luck. They were too flimsy to stay mounted and would not fit my phone case. I decided to try this style as a last resort, hoping it would work, but expecting that I would have to do a modification within a few days. No such action is necessary. This is a miracle product for me. It stays put on my car, it holds my phone securely, and I can change it when I need to. The product is great, the warranty is great, and the price is great. It showed up in one day.
👤Many types of mounts don't work well with most types of cars. It would be universal in working regardless of your car. You can easily place it right where you want it, instead of being limited to placing it near the vent or something like that. The hold is tight. You should put your phone in before you place the mount down. Make sure you place the mount in a way that it sits upright. If you put it wrong, the nice thing is that it will peel back off and stick securely again.
👤I love this thing. I have bought it for many of my friends. It is soft silicone. It holds my phone securely so that I can use the gps while I am driving, so I don't worry about it damaging my phone. I have had it for four months now and it has stayed where I put it, despite the change in temperatures on the North East. I think you could just spray some water under it and it would be sticky for a little while before it dries. I don't want to move it. It looks like it is in the dashboard. People are surprised when I put my phone in it. It only holds your phone in landscape mode, but has held my friends' phones in a variety of cases. If you think about it, I tried many before this one - vent, cd, windshield, and nothing compares! My vent was blocked. I was blocked from using my touchscreen. I always worried that the window would fall down. It keeps your cell phone in your line of vision without being in the way.
A dashboard clip phone holder is a good way to switch between horizontal and vertical screens. The dashboard clip car mount can be used for multiple purposes. It can be used as a mobile phone holder on the table. The car phone holder has a variety of practical materials that will not damage the dashboard. The dashboard phone holder has a base. It can be installed on the dashboard even with a curved surface of the car, and firmly hold your phone to prevent scratching and falling. This car phone mount is compatible with most phones, from 4 to 7 inches.
👤Terrible. The Elbow joint cannot support the weight of my phone. Joints flop over the dash.
👤I put it right where I put it and it sank slowly but surely. I squeezed the clips on day two of using it to hold the phone in the back of my car. When we have three, it should be ok, but we need to release the phone and put the back seat back together. I have two left and an apple care plan. I live in Texas and blocking the AC is a bad idea, I didn't want to put anything in my air vent.
👤The info screen on my car has a holder above it. This works better than the cupholder phone holder that I have been using, because it is out of the way and easy to see. I need a way to secure the wire to theusb port in order to use it for auto. When the wire touches the touch screen panel, it confuses the radio or app that is running. I will come up with a solution.
👤This is designed to grab a bare phone. My safety case was not going to fit into the phone. This had the exact mechanism that would work with my vehicle. I used a heatgun and needle-nose pliers to adjust the four clamps to fit the phone case. This works perfectly with the A71 5G out of the box. I had to modify my case because I like to keep my phone in it.
👤The mount works with my Mazda. I have a mount that keeps the dash cover in place, even though it is not adhering to the dash. The mount is flat to keep the phone out of the way. It is plastic and not sure how it will hold up over time. I am pleased with this so far. The CD mount holder blocks the display when trying to see the time or use the backup camera, but I like it better. I am pleased with the way that it sits, it is snug without moving.
👤I love this holder. I put it on my desk. I needed to find my phone while cleaning out my files. I put it on the dash of my car. The phone is very stable and easy to take out. If I could make the grips bigger, that would affect the effectiveness of the holder, but it wouldn't. I have purchased at least 4 different holders and this is the only one that actually works. I have a phone.
👤The unit holds the truck to the dash. It takes 2 hands to put the phone in. To squeeze the tabs and to insert the phone. You might not be able to use your phone's protective case. It is very thin and works. The plastic clip on the mount snapped off after I removed the unit from my car. Returned for a refund.
👤If I hit any bumps, the phone holder part moves on the dash.
The base for the safe car phone holder is curved. It's easy to see the view from the cellphone. You don't need to turn your neck to see the interface. Don't block the sight, make driving safer, and reduce the burden on eyes and neck. The dashboard should be within 2 inches. Before ordering, please check your dashboard thickness. The car phone mount is stable. The rubber in the base was added with the 50X strongest gripping making it firmly mount on the dashboard. The telescopic clamp can hold the phone firmly. Don'taggle even in a bumpy road. The car phone holder pad can be used to switch between horizontal and vertical screens. The arms can be pivoted up and down to allow a better view. It's an easy and safe journey. It is easy to install a car phone holder. Ultimate Protection for your dashboard is provided by the soft non-slip Silicon on base. The car phone holder mount is universal and can fit most devices from 7 inches to 14 inches. Such as the iPhone 12 11 Pro Max/XR/XS/X/8 Plus/7 Plus/7/6 Plus/6S Plus/6S, the S10 Plus/S20 Plus Ultra FE S9 Plus/S9/Note 9 and the Note 8.
👤When I hit a bump in the road, my phone would fall from the floor of my car. It didn't get tangled under my gas or brake pedal and become a safety hazard. After two days, stopped using.
👤I was excited to try this mount because of the good reviews. I have never been a fan of the AC vent mounts so this was perfect for me. I tried to mount it in my car after opening the mount, but it didn't work out. The whole mount falls off because the clasp isn't tight enough. The part that holds the phone seems to hold it in place. If the clasp worked, it would be perfect. Very disappointed. Maybe I received a faulty product.
👤Where has this been all my life? All of them were either stuck on the dash or in the vent. The ones that stick on the dash don't really stick because of the oil based products they use on the dash. Thank you for bringing this product to my attention. I like it so far.
👤The best phone holder so far. I was tired of phone holders falling to the floor when they detach from the glass. This one does not attach with a stick, it has a piece of furniture that can be used to hold it. The phone is held securely and does not fall off. It can change shape. I have a large phone with a case that's 3-3/16" wide, and this holder is wide enough for my phone to go a little wider. Great deal! I love it!
👤There is an update to the original review. While trying to open my phone, I had to use the phone's battery. The jaws are supposed to return it to the dump. AMAZON HAS A GOOD RETURN POLICY. There are better people here. This holder is leaps and bounds better than the last one I had, which was 3 months after I removed it from the car, so I would recommend one of those original reviews. It still has glue. There is a thing that may or may not affect others. When I touch the car's clamp, it wants to slide off. I was not going to allow that glitch to ruin my day. I put the anti-slip latticed rubber shelf liner under the clamps. The person no longer wants to move. It's easy to take my phone on and off of the holder. The phone does not move when in the holder. I bought this cell phone holder and I highly recommend it to others.
👤I like this phone mount. I tried a cup holder mount for my car. It was hard to use. I tried this one instead. I mounted it so that it sits on the current car maps screen. When I want to use navigation on my phone, I just mount it with this mount and have access to the maps instead of the built in navigation. It is easy to take off since it is a clip. This is better than the ones that require you to stick it to your window or dash, which have never worked out for me.
This car mount is compatible with many gps devices, such as the iPad mini, the phone, and the Yoga Tab 3. Also, the S10/S10 Plus, S8/S8 Plus, Note 8/S7/S6, V30/V20, and thePixel XL are included. The Sticky Non-Slip Base adhere to the flat dashboard with a strong grip. Stable even on a bumpy road. Ensure that the driving is smooth without worrying about the gps holder falling down. If you keep your phone/GPS in front of your eyes, it will not bring visual blind spots and you will be able to drive safely. Different devices and flexible angles can be achieved with three slots design. You can wash the gel pad if you feel a decrease in stickiness after a long period of use. If you feel that the mount is not stable, you can use the 3M sticker to fix it. Four actions are needed to finish it. Remove the transparent film from the dashboard and put the holder in the upper clamp. The rubber clip and rubber gel pad are soft and will not hurt the dashboard.
👤I tried to hold the screen of my back-up monitor on two other systems. My car is a Genesis and I live in the Central Valley of California. The cup kept falling off when it was warm. It's not great to find a monitor on the floor. The kind for my cup holder was too far back. The Genesis does not allow use of the air vents. This one works. There are no issues and it's also replaceable. I can use this for add-on on my new car.
👤The phone holder is very stable. I wanted to switch between those two items as needed. It's closed and flat when not in use. It's mounted on a rubbery pad. I didn't use the enclosed sticky tab. I like that I don't have to glue it down, it just grips on its own.
👤This was bought to use as a gps device for a long road trip. It has held up well on the dash of our car. It's great so far, but I can't speak to longevity.
👤I bought this dash mount holder for my new car. I was worried that the mount would fall, but it didn't. Since December, I have left it on my car. I don't know if it would still be secure if I had removed it.
👤We bought this device to hold our large device on the dashboard. It was advertised that it could hold larger devices. When you get it out of the box, it works well. It opens up a pair of jaws and holds the gps between the teeth. It is difficult to hold a larger device because it has to open up very wide. There is not enough clearance between the dash and the windshield for the wide-open gps mount to fit. The device is fine, but we had to return it because it wasn't able to perform the function we purchased it for.
👤The holding power for the tablets is not good and needs to be tightened so it holds better.
👤I bought something else because the Tablet didn't fit. It may work for others.
👤It's a good idea to prefer over windshield cup holders. It's never necessary to be adjusted. I keep the gps in the car. It was difficult to remove the gps.
This phone holder can be used on a lot of things. You can always find a suitable position to mount a film if you have to navigate or lie in the seat. It can be used in many other scenes, such as table, bookshelf, kitchen, office and so on. It has three axes of rotation which make it easy to adjust your phone to the best viewing angle and avoid blocking the line of sight. You can fold it up if you don't use it. The installation of this vehicle phone holder is very easy, just open the box, put the phone in, and then remove it. You can either move it or remove it. It's not the same as those sucker glue holders, which can only be fixed in one position, leaving a sticky mess after removal. The Stable Without Shaking is made with four clip feet. The base has a powerful spring that allows it to hold on. Soft pads are used to prevent injury to your car and phone. Most mobile phones can fit in the retractable arms. They can give you a best solution if you write to them first.
👤The phone mount I ordered was recommended by a friend. It does not work on my dash, so I received it with no problems. But... This is not the fault of the product. The interior dash design of my Toyota corolla makes it impossible to use any other phone mounts other than the ones that fit into the cd slot. This product is strong and sturdy, but I would advise you to check your dash before ordering, because it may not be strong enough.
👤The case of my phone makes it hard to get into and out of the phone holder. It is necessary that the Clamps are able to expand a little more. Over time the phone holder will come off the dashboard and the bottom clamp needs to be a little longer. If I center it over the buttons, it will work. The phone will turn upside down if I don't tighten the turning point screw and put the Clamps over the buttons. It's easy to move from one location to another. This is a good product, but needs some tuning. I spend around 18 hours a day in a truck and have tried and gone through a lot of different phone holders. The phone holder is in the middle.
👤I had it for a day, but I think it's going to be great. I think that the operation of it is a good one as it is a spring clamp. The phone can tilt and rotate to give the best view, and it can clip pretty much anywhere. It doesn't move when you clip it to the steering wheel. The side buttons you use to attach your phone can be a little difficult to use, especially for larger phones. It looks like it will last for a long time if the texture grip pads stay on.
👤It is easy to place and remove the phone. I use my phone for navigation and music. I drive on a lot of bumpy roads. It is out of the way. I don't use my phone while I'm driving, I just speak the directions and say what I want to hear. I don't like the suction devices that stick in the window. I can put my phone in a safe place with this phone mount.
👤It's recommended when you have high heat areas like FL, Puerto Rico, GA, TX, AZ, NM, and so on. It is a very good cell phone mount, it is sturdy, and you can just set it and go. The spring clip is very strong, but also worried that it will leave a mark on my dash. It's like how you can face a variety of angles. I was expecting the cradle dock to be a lock-able button in the open setting, but it is not. I wish the spring release had an extra little tab to help open it. My dashboard is wedge-shaped, it is not a perfect parallel lip from top to bottom like a table top. The dashboard clip tends to slip after about three to five 20min drives because of road vibration.
The cell phone holder is applicable to all mobile phones from 3 to 7 inches. Mini -11-11 Pro-11 Plus/7/7 plus, the S8 and S8. Plus, S10, S10, Note 8, Note 9, Note 10 pro. The car phone mount can be used for phones like the IPAD, Mi, and other devices. One-handed operation, insert or remove your mobile phones, small size, is the special design. It can be placed anywhere on the car's dashboard, using a 100 degree comfort angle, which reduces driving blind spots. You can apply to SUVs for Ford, Chevrolet, GM, Subaru, Volkswagen, Benz, and KIA. The cell phone holder and the bottom plastic liner can be washed and re-used, and will not leave any traces when removed. The phone holder is made from high-tech glue and will be the same as the new one, just rinse it and dry it. The cable slot design makes the charging cable well organized. The mat holder has a good amount of space for keys, coins, gadgets and other items. It's a cellphone stand in office or home for meetings, movies, games, and more. It can protect phone against bumps, scratches, and flying out when there is an emergency braking, sudden stop and sharp turn. The double snap design of the vehicle mount will not press the volume keys.
👤I liked the product at first and it was made of good quality rubber, but now I regret buying it. I found the bottom of the glue completely melted in my car, and it's going to take a lot of work to clean it up.
👤It's a perfect solution to sagging phone holders. The holder is rubberized so it doesn't fall. I have purchased at least 10 holders and all break. This one is a winner.
👤I like this holder better than any other I have used, but I think it is dependent on the type of car you have. You need a flat area to place this so you can see the road. I don't like having to look to the side in order to see my navigation, and this keeps everything in my line of sight. Even though it is attached to a slightly rounded area, it is very stable. I tried a cup holder insert with a long arm. I had to look away from the road. The cup holders are too far away from where we should be, and the kind that makes it hard to see the road, is something that always blocks at least some forward visibility. I liked the holder for a long time, but I use my vents too much. It makes a lot of sense in my Civic, even though I thought a long time before I placed it there. I can still hear the car shift even though I am blocking my view of the tachometer, and if I have any concerns, I could remove the phone to see what is happening.
👤Reality sinks in once you start using this product, it seems like a great idea. If you don't need a full screen, but still want to look at your maps at the same time, this might not work for you. It takes some getting used to and most of us are familiar with the things you have to do without on a reduced screen. I will most likely use a full size upright phone holder the next time I have to buy a replacement.
👤I was surprised by how small it is, but I was impressed with how well it works with my phone. Some reviewers said they couldn't use the device with the phone case on. I have a phone in a Silicone case and it fits perfectly. I ordered another one for my husband because I am very happy with this device, but I don't understand why I have to pay for shipping when I already have other items on my new order. If I have to pay shipping, I will cancel the second order.
👤Sits in the car. It may be affected by heat. So far, the sticks are ok. I like it over vent mounts. It's easy to place or remove the phone. The phone seems to stay in place. There is no need for magnets or glue. Depending upon placement, can obscure the view.
The upgraded dashboard cell phone holder for car adopts the principle of triangular stability and stably supports the cell phone at three points. The mobile phone holder for car has a rotating design that allows you to adjust the angle easily. Both drivers can use it. The cell phone mount for car is more convenient than the ordinary magnetic car phone mount because you can place your phone vertically or horizontally with one hand. The cell phone car mount bottom has a strong stickiness. It is easy to remove and does not leave traces of residual glue. You will get a 1-year warranty and 100% customer support for this car phone mount. They will give you a full refund if there are any quality problems for 30 days.
👤The smallest mount I could find was here. The big ones take up too much space and partially obstruct my view. The mount is mounted with a strong glue. The phone can be placed either vertically or horizontally. The charging port is blocked when the phone is horizontal. The only way to vertically charge the phone is to place it upside down with the charging port on top. There is a The plastic used to make the fingers hold the phone. My second gripe is that the fingers are not pointed towards the window. The phone is mounted in such a way that it is hard to reach except for people with long arms. I have to pull the seat forward to turn on the screen. This is an excellent alternative to large mounts. Look at my pictures.
👤The ratings foruction power and security features don't seem to apply to this item. This item works very well and has excellent adhesion. Simple design. It was easy to use. I've seen at least 10 different car phone holders, of various mounting styles. This design is the winner for me as it requires little-to-no effort to "load" the phone into the holder and it stays in place, even through rigorous shaking, until you remove it yourself. It can be used around the house to hold a phone, tablets, or thin book. I was very impressed with how well this product works. Very happy with the purchase. Would buy again.
👤This is a great car mount for a cell phone. It's easy to install and not bulky.
👤I bought two for my wife and I. One for the driver to use for gps, and the other for the passenger to watch tv. I'm very happy with them so far.
👤We've used one of these so far. The design is easy to use and holds the phone securely. The glue sticks on a clean dash do not hold after a week or so. It would be a 5 star if it held.
👤It's easy to use. I thought it was a rubber/silicone holder that sat on your dash. I didn't know it has a sticker on the bottom. Love that it spins. Small and not bulky. Love it.
👤No se suelta con el sol. Me encanta, haba provado varios antes de the modelo. Estoy feliz con el producto.
👤I bought a lot of cars.
The Joyeky cell phone car holder can be held in both horizontal and vertical orientations. It's a good idea to have a phone in your car for things like gps or movies. The phone can only be charged in the horizontal position if it is stuck on the smooth surface. The Joyeky car phone mount can fit the phone from 3 inch to 6.8 inch. The Joyeky car phone holder has a base that can be turned around. You don't need to adjust the angle frequently when you are in the car because you can adjust any angle that you feel comfortable with. No damage to the car dashboard. The bottom of the phone holder is made of high-tech adhesives that can be washed. It won't leave a mark on the dashboard. Even if there is an emergency braking, sudden stop and sharp turn, the sticky rubber pads on your phone will keep it from flying out. Sunshine Resistance The Joyeky car phone mount protects your device from the sun's heat. You can still see the screen in your seat under the sun. The reflected light will affect your view.
👤Works well in landscape or portrait mode. There are all plastic housing. I like the Strong magnet. The base is effective. When not in use, the clamshell has a low profile. The tape did not adhere to my car. I used double sided gorilla tape for the win. One star off there. Great product! 4 out of 5 stars! See the video.
👤It seems easy to install and pivot. You can't charge your phone in the vertical position. You can't remove the holder with one hand. You need a very thin case or no case at all. This won't work with the Commuter or Defender. The best thing I can find for my vehicle is the 2015 GMC Sierra, vent type holders and CD holders are not compatible with it.
👤The phone holder is easy to use.
👤This is what I was looking for in a car dash mount, it's easy to use, it doesn't damage the dash, and it can be used vertical and horizontal. It doesn't fit a phone with a case. I moved my popsocket, but it still doesn't fit in the case. I don't have a large phone and it's just the average otterbox case. This only works on a phone. I'm returning it.
👤The mount is sticking to my car so far. We will have to wait until the summer to see if that is the case. If you're lifting straight up, the magnet is strong. That's not the case when you lift the lid to place the phone. The unit is out of the base. I have to put my phone back in the mount after removing the unit. When the phone is mounted horizontally, there is not enough adjustment of the phone angle. The phone needs to be mounted at a lower angle so that it doesn't reflect on the glass at night.
👤The mount is great. My previous one was a lot bigger than this one, but it still manages to do the same job. This one has the ability to mount vertically as well.
👤It was very easy to install and the glue stuck on. If that changes in the future, I will update. My phone doesn't fit in a horizontal position so I'm giving 4 stars. I have a case for my phone. The arms of the vertical holder should be able to go out wider if they ever redesign this product. A lot of phones are larger than mine. I would like the horizontal position to remain open. I wouldn't have to open it and put my phone in every time I use it. Maybe I will engineer it or put something in it. To make it open all the time.
👤I love the rotation and compactness of my car. The phone is held with a Silicone case.
👤No ocupa mucho espacio en el tablero, pero no tiene tanta fuerza.
👤It is not a detached Magnetic Base Dashboard Cradle.
👤No me gust con el tablero. Quizs dejarn ms profundas la endiduras.
The Andobil 3-in-1 car phone holder mount work well for the dashboard, the window and the air vent. It is a good choice for all types of vehicles. The Super Suction Cup uses 3 layers of new gel material and has a two-step locking mechanism. It never slipped or fell off after 6000 tests. The glue is still perfect. The phone holder is bigger than others. Large size phones can be protected from slipping and dropping. You don't need to remove your thick case while using this phone holder car. The telescopic arm of the car phone holder can pivot up or down for a variety of angles. The top of the pole has a ball joint. You can adjust to get the best driving. The Andobil product manager designed a foot for car phone holders. The adjust foot makes the car cell phone holder compatible with all phones. You don't need to remove your thick case while using this phone holder car. ANDOBIL car phone mounts always provide 24 months of worry-free support.
👤I bought this mount from the first 5 pages. I saw the design and photos and thought it was the one I needed to buy. I used to have one attached to the air conditioner but it was loose and my car has a bad A/C fan so I was looking for a phone holder for it. I used it for a while. It's easy to adjust it's ankle and length and it was really stable and strong. You can choose where you want to see your phone screen, held by the car mount. If the location is not good to look at, you can pull it off. There is a If you want to buy this car mount holder, you should know that the mount will be pasted by a sticker on your phone, which I don't think will last forever. There will be a shortage compared to those mounts on A/C fans. The car mount's connections with the glass can be easily fixed by pushing the button near the top. The price is reasonable. Long-term use reviews will be updated and all kinds of comments are welcome.
👤I have the tech package and this fits in the GT350. I returned the "carbon fiber" version because it had a bubble underneath, but I ordered the cheaper version first. I got the black version with a rubber backing. The bolt head was painted black. I put padding on the bottom of the cradle so it wouldn't rattle on the vent. The magnetic mounts sent my phone flying when I turned corners.
👤I've owned a lot of different holders over the years that have either broken from being made cheaply or had a weak cup. This is the best holder I have ever owned. I like to put mine on the dash, but you can put it on the windshield as well. It is easy to assemble. The base is strong and the holder can be locked into place. You can remove your phone from the jaws. I have a larger phone and it fits in my case. The pitches and turns are in 888-349-8884. I've gone over some rough roads and it doesn't fall over. Everyone who says the base doesn't stick at all, is either not locking the lever on the front to secure it to the dash pad, or they're not removing the plastic protective film first under the unit itself. I've had mine for a month and I've had no issues.
👤The new model has been completely revised with a new glue on the cup that leaves no mess when removed and can be cleaned multiple times. The phone holder is made of high quality materials. I have never used a product like a dump truck in construction sites. Thank you for making a great product. It's important for me to have a phone holder that's safe and can be adjusted. This is very easy to install.
👤The ad said it was costly but worth it. I can either put it on the dash or on the windshield, it is very firm and rugged, which was beyond my expectations. I received a letter from the manufacturer stating that if I wanted a new suction cup I had to give them my address and they would send it to me. And they did. I will be using this device in my jeep for a long time. Thanks guys.
This car mount is compatible with all mobile phones from 3 to 7. ABILITY: The phone holder has a reinforced dashboard, large gel base, and circle of silicone film and a cup to hold it in place. SECURITY: The phone holder is made of high quality spring and two ends of silicone, so it won't slide or fly out, even if you take a sharp turn or accelerate. There is a certainILITY to it. Silicone is not a permanent attachment to the car. It can be removed from the dash and the bottom will become sticky after a few uses. The cell phone car holder can be moved to the best position for your view. There are two different angels that give you more options to see non light reflect and clear screen view.
👤The thing works. It doesn't move around, it sticks to your dash. Even though the dash is curved, the soft base on this unit fits the shape of the dash and stays put. It's actually better than I anticipated.
👤I only had this dashboard cell phone holder for a week, so I can't speak to its longevity. It is all that is advertised, and I can speak to its function. I was concerned that the base would curve to it if it stayed on my dash. It comes up off the surface easily, so there's no need to worry. It cradles my phone in place when I use it as a gps device. One of the reasons I chose this model is because I wanted something that could hold a portable cylinder-shaped wireless speaker. I did the best thing I could and looked for something that I thought might work, but I couldn't find anything that was specifically designed for that purpose. I wasn't sure if this would work, but it was a perfect fit and I wouldn't have held it against the product if it didn't work. The speaker slides into the cradle and the clasp holds it in place. Since I started using it, it hasn't budged. I think it will have a good life because it feels solid in construction. I can't imagine not having it with me on the ride.
👤This was amazing. I needed to not have my phone on my lap while I traveled for 9 hours. I bought this device. I took a car that had a slight bump, but it was lightweight and didn't damage the car with icky glue...and we traveled close to a tornado. It held my device in place and adjusted it to any device. I'm not sure if it would hold a larger device. You have to check the measurement. I also bought a lighter that plugs into a wall outlet. It fit perfectly and didn't try to remove the device from the holder. One of my favorite purchases on Amazon.
👤This item is great for my phone. Since the phone is so expensive, I didn't want one of the holders that hangs from the window or off the vent. When I hit a pot hole, the phone jumps out of the holder with the risk of cracking the glass, so I chose the Aonkey for the dashboard. It was a good choice. I have a phone that is too big to fit most holders, but it holds it with or without the cover, no problem with the Aonkey. I don't like the idea of being told to stick it to the dashboard. I don't want my car to be permanently marked with glue, so I'm reluctant to do that. I don't have a lot of faith in that happening. My dashboard is wide enough that I can just place it and it is heavy enough that it stays in place even when I hit the road.
👤This phone holder is very nice. When I take the phone out, the vent holders come off and I am frustrated. I am using a phone. It will fit a bigger phone. It sticks into place with a large circle of glue around the center. If you have a flat or curved dash, the outer rubber allows for flexibility. Even when it came to an abrupt stop, it stayed in place. Removes by opening it. This is my favorite version of phone holders.
3 in 1 multiple functions car phone holder, made with best airliner PC material, can be mounted on the dashboard or air vent firmly. One small car mount or car vent mount is all you need. It's good to apply to most of the cars, pickup trucks, SUV, trucks, taxis. Feel free to contact them if you are dissatisfied. The car phone mount has a 2-step lock mechanism and a super strong stickiness cup. It can be locked in the car. The dashboard pad provides a smooth surface. The car holder can be more secure. The flexible air vent clip is ideal for most cars, it's flexible and helps this vent phone holder grip tightly on the air vent and protects the blades from scratching. The car cell phone holder mount is super wide and can fit all smart phones and thick cases. It's compatible with the following: 13 pro, 13 mini, 13 pro max, 12 mini, 12 pro max, 11 pro max, 11 pro max, 11 pro max, X, and X-factor. 8/ 8 Plus/ 7/ 7. Plus/ SE/ 6s. The S20 is a variant of the Note20. S20+/ S20 Ultra 5G10/ Note10/ S10+/ S10e/ S9/ S9+/ S8/ S8+/ All cellphones, gps device, and Note8/ S7/ S7 Edge. The car cell phone mount is rotating. You can adjust your phone to any angle with the help of the telescopic arm and the ball joint. You can find a best view for your trip. The mobile phone holder is extremely flexible and can be used vertically or horizontally. It's convenient to pick up phone calls. You can focus on your drive, VICSEED mobile phone holder will do the rest of the work for you. After the easy and convenient installation, adjust the bottom leg of the mobile holder for car according to your phone size, put your phone in, lock your phone 100% tightly by squeezing the arm hard. Press the left bottom release button to release your phone. You can use the VICSEED car mount to drive. The most durable phone mount is the Vicseed. The carbon fiber panel is always in good shape. It won't suck ash easily and will get ugly. It is not like other Silicone phone clamps, it is made of Airplane PTFE, which is temperature resistant. You deserved the mount.
👤I knew it would be difficult to stick to the windshields when it was in the sun. I didn't know it was designed to only stick to windows. Most of the places where you could use this, like a dashboard, won't work because it needs a completely flat, smooth surface. If you want to be able to adjust your phone to deal with glare, you can't because the extendable arm only moves in and out. A pile of junk is sitting in my car. I was contacted by the seller who offered a refund after I posted this review. They asked me to remove my negative review many times. I am glad I got a refund, but I am not ok with being asked to remove my honest review simply because it affects their rating.
👤The new Iottie stick is hard plastic, compared to the soft Iottie stick, it won't fall off during the summer, I think. I have already set it up and tried it, my phone stays in place, and it comes with an additional vent adapter, which allows you to adjust the tightness to the vent. The holder has a larger back support than my old Iottie, it's very easy to use with one touch, and there are pads in the arms to make sure the phone is in place. If you have a large phone like me, you can pull down the bottom pad, so your phone will be hold in the middle, it's really worth the money.
👤The phone mouth has a wide variety of adjustability options. An automatic closing feature would have made it better. It's convenient, it's the only problem that every driver needs is a place to put their cell phone. This even fit my larger phone.
👤I like the phone holder. It holds up well. If you leave your phone in it, it won't hold up in the hot Alabama summer sun, and I will warn you. I don't think anyone will. It works perfectly on the dash. I bought it from the seller and I recommend him.
👤It's not perfect, but it's pretty good. The clear silicone rubber compound that makes up the suction cup is very easy to clean. You'll need to clean the surface with rubbing alcohol to remove the shiny stuff. I'm pretty sure it will stick to glass, but I didn't try it because I wanted my phone in that location. It will not stick to any surface that has a slight curve. My first choice would have been such a location. The included plastic disk with a back adhesive covered with a red plastic was problematic, as it was similar to auto trim tape I have used before with good results. The disk is used to apply the cup after sticking it to where you want it to go. It didn't stick any better than a post-it. I think the disk had a problem. Disappointing, but not a deal killer. I think that the soft rubber of the cup would pop off a car in a hot summer day. It is softer than most cups of this type, which helps it adhere to tougher surfaces. I don't think it will last as long. I wish I could use the included arm with it, as the vent clip holder works very well. I wish the main arm was attacked with a ball sockets on both ends and could be swapped. When the design is updated, I would recommend this change to the manufacturer. I have had this phone holder for a couple of weeks and it's one of the best I've tried. I give this four stars rather than five because it can use improvement.
Gps holder for car dashboard rotate products from Loncaster. In this article about gps holder for car dashboard rotate you can see why people choose the product. Pkyaa and Msovatek are also good brands to look for when you are finding gps holder for car dashboard rotate.
Loncaster, Pkyaa and Msovatek are some of the best brands that chosen by people for gps holder for car dashboard rotate. Find the detail in this article. Luxmo Luxury Mobile, Yaokeep and Staont are also brands that their products are worth to check.