The magnetic mount is powered.
👤I drive two trucks. The additional mount was needed to make moving the gps simpler. The only complaint is that it should have a power cord.
👤A very good replacement.
👤If you are looking for a genuine product, look no further. It was the part we needed. Thank you!
👤The piece I was trying to replace had a square shield in the MAGNET. My mistake is not guns or Amazons.
👤The amount that failed bought a replacement that worked perfectly.
👤My husband has one of these in his semi.
👤The item was described. The item arrived quickly and was thankful for it. My gps broke a month ago and I was upset. I use my gps everyday and I am glad this part was available. The side wire that comes with the gps is not included. I paid a good price for the mount.
👤I replaced my original with this one. I have to take mine out of my truck every night because the glue gets weaker. I want to avoid it falling off the window while I am driving.
👤Exactly what I needed for the second vehicle. All I have to do is take the actual Garmon gps from vehicle to vehicle. Works well.
👤Conforme la commande. s rapide.
This car mount is compatible with all mobile phones from 3 to 7. ABILITY: The phone holder has a reinforced dashboard, large gel base, and circle of silicone film and a cup to hold it in place. SECURITY: The phone holder is made of high quality spring and two ends of silicone, so it won't slide or fly out, even if you take a sharp turn or accelerate. There is a certainILITY to it. Silicone is not a permanent attachment to the car. It can be removed from the dash and the bottom will become sticky after a few uses. The cell phone car holder can be moved to the best position for your view. There are two different angels that give you more options to see non light reflect and clear screen view.
👤The thing works. It doesn't move around, it sticks to your dash. Even though the dash is curved, the soft base on this unit fits the shape of the dash and stays put. It's actually better than I anticipated.
👤I only had this dashboard cell phone holder for a week, so I can't speak to its longevity. It is all that is advertised, and I can speak to its function. I was concerned that the base would curve to it if it stayed on my dash. It comes up off the surface easily, so there's no need to worry. It cradles my phone in place when I use it as a gps device. One of the reasons I chose this model is because I wanted something that could hold a portable cylinder-shaped wireless speaker. I did the best thing I could and looked for something that I thought might work, but I couldn't find anything that was specifically designed for that purpose. I wasn't sure if this would work, but it was a perfect fit and I wouldn't have held it against the product if it didn't work. The speaker slides into the cradle and the clasp holds it in place. Since I started using it, it hasn't budged. I think it will have a good life because it feels solid in construction. I can't imagine not having it with me on the ride.
👤This was amazing. I needed to not have my phone on my lap while I traveled for 9 hours. I bought this device. I took a car that had a slight bump, but it was lightweight and didn't damage the car with icky glue...and we traveled close to a tornado. It held my device in place and adjusted it to any device. I'm not sure if it would hold a larger device. You have to check the measurement. I also bought a lighter that plugs into a wall outlet. It fit perfectly and didn't try to remove the device from the holder. One of my favorite purchases on Amazon.
👤This item is great for my phone. Since the phone is so expensive, I didn't want one of the holders that hangs from the window or off the vent. When I hit a pot hole, the phone jumps out of the holder with the risk of cracking the glass, so I chose the Aonkey for the dashboard. It was a good choice. I have a phone that is too big to fit most holders, but it holds it with or without the cover, no problem with the Aonkey. I don't like the idea of being told to stick it to the dashboard. I don't want my car to be permanently marked with glue, so I'm reluctant to do that. I don't have a lot of faith in that happening. My dashboard is wide enough that I can just place it and it is heavy enough that it stays in place even when I hit the road.
👤This phone holder is very nice. When I take the phone out, the vent holders come off and I am frustrated. I am using a phone. It will fit a bigger phone. It sticks into place with a large circle of glue around the center. If you have a flat or curved dash, the outer rubber allows for flexibility. Even when it came to an abrupt stop, it stayed in place. Removes by opening it. This is my favorite version of phone holders.
This car mount is compatible with many gps devices, such as the iPad mini, the phone, and the Yoga Tab 3. Also, the S10/S10 Plus, S8/S8 Plus, Note 8/S7/S6, V30/V20, and thePixel XL are included. The Sticky Non-Slip Base adhere to the flat dashboard with a strong grip. Stable even on a bumpy road. Ensure that the driving is smooth without worrying about the gps holder falling down. If you keep your phone/GPS in front of your eyes, it will not bring visual blind spots and you will be able to drive safely. Different devices and flexible angles can be achieved with three slots design. You can wash the gel pad if you feel a decrease in stickiness after a long period of use. If you feel that the mount is not stable, you can use the 3M sticker to fix it. Four actions are needed to finish it. Remove the transparent film from the dashboard and put the holder in the upper clamp. The rubber clip and rubber gel pad are soft and will not hurt the dashboard.
👤I tried to hold the screen of my back-up monitor on two other systems. My car is a Genesis and I live in the Central Valley of California. The cup kept falling off when it was warm. It's not great to find a monitor on the floor. The kind for my cup holder was too far back. The Genesis does not allow use of the air vents. This one works. There are no issues and it's also replaceable. I can use this for add-on on my new car.
👤The phone holder is very stable. I wanted to switch between those two items as needed. It's closed and flat when not in use. It's mounted on a rubbery pad. I didn't use the enclosed sticky tab. I like that I don't have to glue it down, it just grips on its own.
👤This was bought to use as a gps device for a long road trip. It has held up well on the dash of our car. It's great so far, but I can't speak to longevity.
👤I bought this dash mount holder for my new car. I was worried that the mount would fall, but it didn't. Since December, I have left it on my car. I don't know if it would still be secure if I had removed it.
👤We bought this device to hold our large device on the dashboard. It was advertised that it could hold larger devices. When you get it out of the box, it works well. It opens up a pair of jaws and holds the gps between the teeth. It is difficult to hold a larger device because it has to open up very wide. There is not enough clearance between the dash and the windshield for the wide-open gps mount to fit. The device is fine, but we had to return it because it wasn't able to perform the function we purchased it for.
👤The holding power for the tablets is not good and needs to be tightened so it holds better.
👤I bought something else because the Tablet didn't fit. It may work for others.
👤It's a good idea to prefer over windshield cup holders. It's never necessary to be adjusted. I keep the gps in the car. It was difficult to remove the gps.
Don't get lost! This CD Slot mount is for keeping your NuviGPS with you all the time. Attach the mount to your CD slot. Clearing up the car's windshield is an alternative to the dash mounts. If you want to move your navigation system from one vehicle to another with the least amount of hassle, you can use an extra gps mount. The mount is not included. Only the base. It is compatible with all of the NuviGPS brackets that came with it. It is compatible with all of the NuviGPS brackets that came with it.
👤The mount from aps2car.com places the gps in a better viewing position than the original mount. It's close to my eyes, it's in the sweet spot of my variable focal glasses, and it eliminates the background glare. It's easier to see the gps screen against the dashboard. I still prefer this mount over the original because it vibrates when driving over rough roads. My MINI Cooper has a stiff suspension, and Wisconsin roads are terrible. The quality seems to be the same. This fits the CD slot in my car. I had to replace the original fastening knob with an allen-head fastening because it didn't clear the dash above the mount. Look at photos. The CD slot in my car is larger. The mount has tabs that can be adapted for a larger slot. I think that if your vehicle is new that shouldn't be a problem.
👤The CD slot on my truck is set back so that the screw doesn't have to be pressed against the button. I had to grind the three point knob to a circle to make it fit. Press against the top and bottom of the CD slot to secure it as you tighten the knob. I need the holder to be tight because it's holding a larger device than the Nuvi. I was happy with my purchase.
👤The ball fit is perfect, I bought this to mount my Nuvi 55. This unit is very good in the CD drive. It is against the law in Illinois to mount above the dashboard, and I recently found out. The top of the navigation unit in my car is mounted in this holder. The navigation device in my car does not interfere with the use of the radio. I like this mount.
👤It does what it is supposed to do, but I have concerns about it. Nobody looks at the other end because we are so worried that our model will fit. The holder's tab that fits into the CD slot is straight, but the player has a slight curve to it, so a good portion of the tab is sticking out of the player. I don't know if I want to trust the gps to stay in place over rough terrain, with the weight of the gps on the other end bouncing around. It may be the reason why it shakes for other reviewers. Make sure your CD slot is straight enough to accept most of the tab that's inserted into it, in addition to making sure your gps is compatible.
👤The CD slot was too close to the face of the CD player for the tightening knob to be close. I couldn't turn the knob to secure the unit. I replaced the knob with a screw that had the same thread and was able to secure the unit. It holds my gps. To trim the knob to a smaller diameter, you could replace the screw. The easiest way for me was the hex-head screw.
👤I have this to hold my gps in my car. It is sturdy enough to hold my gps. It hasn't moved or fallen off, it doesn't obstruct my view. It is easy to install. If you need a tighter hold on it since you put it in your CD player in your car, it doesn't use suction power. You can't use the CD player to listen to music. I listen to the radio most of the time. If you like to use your CD player in your car, then this isn't for you. It was perfect for me.
For the StreetPilot C500. This cup is used to secure your device to a smooth surface. Not included is the mount.
👤Leave it to the navigator. I can't take the mount off my car because the force on my car is so strong that I can't take it off myself. The plastic lever that was used to tighten the mount fell off the assembly onto my center console. When I put the unit back in place, I noticed it had very little Torque. They have to be replaced once they break. Anyway, now. I can't remove the mount from the lever even when I release it. I would break the plastic on the replacement unit if I tried harder. I usually remove the Garmin from my car at night as the entire unit/suction cup mount and the Garmin itself were falling onto my center console due to excessive heat build up in the morning. Not anymore! ! I put the gps device in my center console storage compartment and leave the mount on the car. In the morning, I attach the gps device to the plastic ball, and that's it. The unit is much stronger than the mount that came with it. If you want to buy a navigation unit, invest $11 and buy the Suction Cup Mount from the store, as it's way more durable and tight. Keep the mount that comes with the Garmin as a backup. The replacement unit fits my device perfectly. The replacement unit will fit the part, so no worries. Thanks to Amazon for keeping the replacement parts in stock and to Garmin for manufacturing the replacement parts that naturally need to be replaced over time. I am very happy with this replacement mount. Don't hesitate to buy it. It's better than the one that came with the unit. It is amazing.
👤I had the cup for about a year. It doesn't stick to the car for more than 10 minutes. I like to use a gps device instead of my phone. I had to go back to my phone because it was embarrassing to have the gps fall into the lap of a client. It does not suck is a bad thing. Very disappointed. It's a pity.
👤This is the same version that I bought before. I'm glad I read that review. I encourage everyone to do the same. It works better than a knock off, but it costs more, so it's better to stick to the windshield. It seemed like the knock off mount would come undone when I was in heavy traffic, I don't know about anyone else. I like to use both my phone's navigation and my phone's navigation just in case the phone loses signal.
👤A year ago we bought a solar powered back up camera for our car. The original mount was not compatible with the dash and would not fit. We ordered a mount that came with a disk that you can mount to a textured surface, then mount the cup directly onto the disk. It has been great so far. The original was thrown away because it was so bad.
Amazon ships in Frustration-Free Packaging. The shape of the four-arm is similar to the dashboard. The ball mount is easy to attach to your cradle. The StreetPilot C5XX series is compatible with the nvi series. One-year limited warranty.
👤The AC vent holders block the air flow and the suction cup ones come loose right away, so I've tried all of the other mounts. I had to remove the AC grate clips when I wasn't using them. The clips are difficult to remove and insert. The cup was difficult to get to stick to. I decided to give it a try and am happy I did. This is on top of the dash of my Honda CR-V. This thing didn't budge a millimeter because I took some corners hard and did some hard stops. I can remove the gps from the dashboard and put it on the floor in front of the seat to get it out of view when I am parked. Simply put it back on the dashboard and I'll leave. I finally found a mount that works for me.
👤I don't know if this product works or not. I didn't get a chance to use it because it doesn't fit the DriveSmart 65. I was going to buy the DriveSmart from the store, but on the page where it states "Frequently Bought Together", there was a friction mount listed. I assumed it was made for the gps device I bought. I was wrong. This type of mount does not fit the DriveSmart base. I would like to see it removed from the recommendation listing. I don't like wasting money.
👤This thing is great. I rely on the voice assist on my gps to help me avoid looking down while driving, but sometimes it can't be avoided. I've tried a lot of different mounts over the years and this is my favorite. It stays on the top of my dashboard and is very well weighted. I can read the gps with a quick glance. One advantage of this is that once the mounting bar is in place, you can either lock it in place or leave it unlocked and it will turn around as needed. I will probably never lock it because the mounting bar doesn't turn without help. I have a compartment in my dashboard that I can put shade in if it is particularly sunny or if I am on a bumpy road.
👤The concept is great, but the ball where the gps is attached is too small for my gps, which causes the screen to flop down. I measure the diameter of my window mount ball to make sure it's not too big. The window mount is 17.21mm. The ball is about 16.86mm. It may not seem like much, but is the difference between a screed that stays where you point it or points at the floor after a few seconds of driving? I have only read about a couple customers with the same issue, so I assume it is not widespread, or people are more tolerant than I am.
👤I've had a gps device for 6 years and have gone through several cups. Their life ends and the gps falls onto the dashboard, scaring the person driving and anyone in the car. I was a bit hesitant about this purchase, but it really is amazing. The mount can be moved to another vehicle or taken down. The Garmin is in place as it should be. If only we could get the navigation unit to start packaging these babies.
This ball mount is not compatible with RV 890. Extra long gout arm. The aluminum long arm can bend up to 13 inches for various visual angles to your liking, making it easy to mount the gps on the dashboard without blocking the field of view. The gps dash mount is made of a sticky gel and a locking lever that will not come undone or slip off, and you can easily mount it on most flat surfaces. The anti-shake stabilizer is held in place by the strong sticky cup ball mount. A replacement gps holder is an alternative to gps air vent mount holder, gps friction beanbag mount holder and gps dash pad. The fit for Drivesmart 50 is wide. RV 660 760 770 (LMT LMT-S), Nuvi cam, and Zumo are all part of the LMT NA. The StreetPilot DriveLuxe Aera DriveRrack series is one of them.
👤The unit is not compatible with the RV. The mount is too small. Unless there is a change out ball for the mount, the unit will have to be returned.
👤I bought this as a replacement for a previous design that was mounted directly to the windshield with a short, rigid extension. The new version has a longer "gooseneck" and a better cup that grips like a vise. My initial impressions are that it will hold up, but it's not certain if it will hold up to the constant vibration and sunlight that weaken mounts over time. If you don't need the reach of the previous version, the gooseneck may be a better choice. I quickly realized that mounting my gps to the fully extended gooseneck without thestabilizer was not a good idea. At the end of the "stalk," my gps swayed and jiggled at the bumps in the road. I didn't think there was a risk of it coming loose, but the bouncing was very distracting. In my preferred mounting location, there isn't a good place to add the stabilizer, so I looked for another location where I could brace the gooseneck or the gps against something solid. I put the gps on top of the dash and mounted it directly in front of my driving position. The two points of stability provided by this may not be the best solution for safety reasons. It's helpful to have the gps positioned so close to the controls. Having a constantly moving display right in my line of sight is not good. I think the previous version was better for my needs, even though I may get used to it in time. It was long enough to keep the gps within easy reach, but off to the side where it didn't compete for my attention. I may try to figure out a way to move the mount back to the side with the bracing.
👤My car is a Chrysler Town and Country. I need a long mounting device to be used in my day-to-day driving with my gps device. Your product is very sturdy. The mounting attachment on my Garmin model should work fine even though it isn't listed in the product description. I noticed that the mounting ball doesn't snap into the back of my Garmin nearly as securely as the stanchion that comes with the typical auto units. I'm not sure if it's a problem yet, but I'm sure a good bounce in the water here in Michigan will knock it off the mount. It has solved my issue with locating my gps device. This mount has long-reach, exaggerated sloped windshields.
👤It's a great gps holder. It holds my gps very well. The ball fits well to the gps sockets and the suction is very strong. It does not come with brackets, so I give it 4 stars. If you need brackets to hold your phone, you're out of luck because it doesn't include them with it. You have to look for a different model. I only need it to hold my 7 inch gps and I am very happy with it.
The mount pattern for the 17mm ball is not included. An alternative to dash mounts won't block your view of the road. It's easy to use, just pop the ball joint into your existing caradle. The air vent grip is improved and you just need to tighten the nut. There are no tools required. It's compatible with the Nuvi 2450. 2455LM 2455LMT 2460LMT 2475LMT 2555LMT 2547LMT 2558LMT 2595LMT 2597LMT 2599LMTHD30 3450LM 3490LMT 3590LMT 50LM 52 55LM 55LMT 57 57LMT 58. 58LMT is a gps device.
👤Have never been a fan of the mounts. This is my 4th vent/dash mount and it's the best. The mount I used to have was broken and replaced by this one. The mount is simple to use, you just tighten the knob and the 2 sturdy arms will fit around the vane in the vent. It seems very stable once it's tight, unlike some of the other mounts I've had. Since there aren't all sorts of spring- loaded clips and complicated mechanisms, there's less of a chance that this one will break. It was impossible to use in a rental car with very deep vanes because of the hook on the end of the arms. It looks like it will work on anything. I like that it keeps my gps off the top of the dash and puts my gps in a better position against the other instruments in my car.
👤I wanted to try this out since it was so small, and since I use a large weighted stand for my vehicle at home, it's great unless you have to carry it around in your carry-on at the airport. Even though the car had vertical vents, it worked great, even though I only used it once so far. I used the mount's tightener to snug it up to one of the vents, and never had to touch it again. It worked like it was supposed to, it never loosened up, and it didn't bounce too much. It took 10 seconds for me to loosen it and remove it from the car's vent. It's small enough to fit in the Amazon Basics gps case I have. I am very happy with this purchase.
👤It's important to rate the function of an attachment, not just its form. This holder seems to be made well and snaps onto the Garmin easily, but it seems to hold it well, albeit somewhat loose. The function is dependent on the strength of the vents that it is attached to. The vent on the dash on 3 different vehicles were not strong enough to hold the 6 inch device and with every turn the device flopped about the dash. It was useless because it never let go and stayed attached. It was difficult to see the face of the device when it pointed out the passenger window. I kept the device for future use, but will not be using it now. We now have 6 portable friction dashboard mounts, which I reverted to.
👤The heat and humidity in Florida made the cups not to hold my device on the car. The plastic invention solved the problem perfectly. Once it's secured, I can tilt the gps to adjust to where I want it. Simple idea and answers the need.
👤Very low profile. I was unsure if the Drive 60 was strong enough to hold it, but it works great! It works better on a straight vent than the vent on the dash that is slanted because the gps is so big. The straight vent has no vibration, but there is a slight vibration on the angle vent due to the gps touching the dash. Very small. I bought a spare one so I don't have to take it off the vent.
It's important that you have driving competencies. Their holder for the car combines convenience, practicality, and safety. You will be able to keep your eyes on the road while enjoying both easy access and an unimpeded view of your phone or tablets. ACHIEVE THE OPTIMUM VIEWS ANGLE. The car tablet holder has the ability to be adjusted. You will be able to set your device to any viewing angle you want, regardless of where you are seated, with the 12” flexible gooseneck and a rotating base. The secure and sturdy base of their iPad car holder is designed to offer a stable viewing experience. If there are cup holders in the backseat, it's perfect for entertainment. There is a multi-entity company. A wide range of devices are supported by their car cup phone holder. That means you can use your phone or computer without using your hands. What is included? Their priority is your satisfaction. You will receive LIFETIME SUPPORT and a hassle-free return policy with the easy to use mount that will make your drive more pleasurable.
👤The holder adjusts to the cupholder. It is made from a good grade of material. Not flimsy or unstable. The adjustment for the cup is secure and can be tightened. The adjustment features are user friendly. If you have a center counsel cup holder, I recommend the long shaft. It's easier to see when you have extra height. I use this in a Dodge Ram 1500 pickup, a Smart car, and a full size semi truck. I will be buying another one because I'm lazy to take it out and switch vehicles. The thumbs up guys... Thanks!
👤The cupholder is between the seats of my car. It's a bit forward from my elbow. I wanted to use it for my gps device. It was easy to fit the device into the mount. The longer flexible neck made it hard for me to drive because it bounced around on the pavement. I thought the unit might fall off. The bouncing and shaking made the gps useless. I prefer my gps to be in front of me.
👤I had doubts about placing the order for this item, but after I received it, I put it on my truck cup holder. I made the right decision buying this item. Thanks for the quick response.
👤I was surprised by this item. I was expecting a flimsy post. The post is bent. You have to use force to bend. The mount will be steady when I use it in a recliner chair. I will only be watching movies on my tablets in the theater chair. It will work for this purpose. A+.
👤It fits my iPad mini very well. I use it for a van. You can make the cup holders work with a few adjustments. I give this one star review because it wobbles more than Jello. You hit a slight bump on the road and the tablet is moving left and right. While the vehicle is moving, the arm cannot support the weight of the iPad mini. It's just flimsy. You should stay away from this product at this price point.
👤It was perfect for what I needed. The dash in my SUV is not the best for phone mounts. I had a magnetic cupholder, but the metal plates on the back of my phone messed up the wireless charging. There was no height adjustment. I had to look at my phone or pick it up. I can adjust the holder so that it's high enough to see at a glance, and it's almost like one of the instruments. It works well in the cupholder. It has a long neck, which may cause it to bounce, but this hasn't been a problem for me. It's great, but it does look a little goofy with no phone installed, other than that.
👤This thing was pretty good. Initially, it was very sturdy. I had an iPad that was mounted in a case and it shook a little when I tapped it or was driving, but overall I liked it. The base was completely removed from the arm at the 45 day mark. I can't get the floating nut out of the base. I really liked it until it was disassembled.
SoeKoa is a brand. The SoeKoa logo is on all of their product packaging. If you receive a product with the SoeKoa logo, please request a refund and make a complaint to Amazom. Only the following models are applicable to this product. The 17mm ball sockets are high quality. The design is lightweight and exquisite. Attach Nuvi to the suction cup holder, portable friction bracket or shirless instrument panel brackets using their brackets mounting. It's compatible with the Nuvi. 52LM 54 54LM 55 55LMT 56LMT 2457LMT 2497LMT 2577LT
👤The screen on the RV770 fell off when we traveled across the country. The display would fall off if the mount was not holding it. I thought I would have to glue the ball mount to the bean bag mount. I was surprised that it was hard to get the ball in and then a very secure connection. I'm happy to be here for the rest of the trip. If you have a gps that can come off and you have the original brackets, these are awesome.
👤It's a shame that this isn't an own part anymore. This part isn't quite right. It's difficult to fit it on the ball because it's too small. I had to use oil to get it on and force it so hard that the metal ring came out. The gps does not "snap" on after all that.
👤This is a good value for the money, even though it is not a genuine part. If you are willing to do a little sanding or filing, it will work. It's not as polished as the original. It has some ruff edges. It took less than five minutes to clean it up so it wasn't tight to fit. I don't think the part is worth twice the price. I prefer the older mounts but they don't work with the new gps design. I'm guessing these won't last more than 3 years. When I need more, I will buy again. They arrived a few days after the order was placed. I can use my gps right away. Thanks.
👤The product is similar to the original one. I have not been able to use it yet because I need a piece of furniture. Prime shipping has no guarantee. The product I ordered and the one I received were supposed to have 2 days. I'm still waiting for the piece to arrive, it took 10 days. This is an issue with Amazon. I choose a vendor on prime who claims 2 days when I need something quickly and often pay more for it. If not shipped, Amazon should back their guarantee with something more. I'm buying more from Ebay because of this.
👤Quality is the reason why these are returned. The gps ball mount has a spring that tries to pop out. The tab that slides into the gps at the top is cast too thick and does not fit into the gps without being forced. I still have a part that works, but these are a flop because I ordered the real part at the same time. I can see using a $3 and having to force it together and break a $400 gps, no thanks.
👤It popped off when I tried to keep it on the back of the unit. I was going to break the unit if it stayed on because I wanted to get it on the ball. Got them today and will return them tomorrow.
👤I wonder if there is a place where Chinese cheap generic parts manufacturers can find good quality parts, if they want them really cheap. The part doesn't fit on the original hook. It looks like it will break into pieces the first time you open it. I am sending it back from where it came from.
ROVE designed it in the USA. IDEAL REPLACEMENT No tools are required, just place the gps dashboard mount holder to the car, and you're good to go. Better than a Suction Cup Mountholder, Never worry about falling down from a window, and make your device works like a heads up display. iSaddle Universal DashboardGPS/Phone holder can fit 99% of Poluar devices in the market, no need to buy a new gps navigation mount for your upgrade, and it can fit music speaker and other things more. Keep the screen clear and protect your device with a large front cover. There is a mount everywhere. iSaddle dashboard holder can be mounted anywhere you want, it can be stable to flat place with a 6.22" gel base. It's easy to remove and clean, so you can use it as a phone Mount or PC Mount. If you get dirt or lose it, clean the holder by water. It's Mount Everything! The gps declination mount is for all the gps navigators. DriveLuxe StreetPilot RV The car mount holder is for all phones, including the Note 10 9. There is a Tablet PC Mount holder for the iPad Mini. There is a365 days warranty. Purchase now and you will get a 100% money back guarantee. If anything goes wrong within a year. There is a365 days warranty. Purchase now and you will get a 100% money back guarantee. If anything goes wrong within a year.
👤I use this for a gps and it's not very strong. The gps goes off the left or right. You have to adjust it constantly. On the bottom, where you can set your phone, it slides forwards and backwards to adjust the viewing angle. It doesn't stay where you put it after a week and a half of use. I don't recommend this for a small device.
👤There were problems with all the different devices I tried to hold my gps to. The biggest annoyance I found was that the brackets that held the gps in place would often engage the screen when I accelerated or braked, throwing up different screens, or adding weird things to it. The product is not perfect, but it is better than any other I have tried, allowing me to use my tablets on my dash. I have to change it about once a day as it slips a little but that is not a big deal. I think this product is very good.
👤I really like it. When you put 3m tape on a surface it will stick and it's hard to get it off, so you have to move it. When you find a spot you want to use, make sure you do it first. I have a 7" gps and it works great.
👤I've been happy with the unit and the price. I needed a touchscreen interface for my phone, and it works well. When everything works out. I don't have to take my phone out of my pocket. Happy with that. It definitely doesn't have decent ground loop cancellation, despite the description. I had to add one more. The mount didn't work for my car. I wanted to move it between vehicles so I wouldn't use the glue every time. I bought a different one. Sometimes the unit forgets that it's connected to my phone. I have to do it again. It seems to happen after I have a new device connected, like my headphones.
👤This was used to setup the backup camera display in our truck. Doesn't adhere to the dashboard surface. The clam shell is not tight. We make the tiniest turn when our display slides out. I may have another purpose for it, I'm going to hold onto it.
👤I wanted a heads-up holder that didn't involve permanent glue or suction cups. This was the perfect fit for my car. It looks like an add-on because it matches my dashboard.
👤The corner of the dash is too wide for this to be used in, because the window slants there. The sticky pad base is good for the dash surface. The corner of the dash in my Ford Fiesta is where I will use the wider clamshell. We will see how that goes, I haven't used it yet.
👤The mount holds my RV at the perfect angle in my truck. The recess is in the middle of the dash. The mount slide has not been used in a tight turn. My cell phone is held in place when the gps is not on. It would be easy to hide it when not in use since it isn't perma-mounted. I gave the unit a 1-star because it doesn't have any power. It does not need it. Very happy.
Gps car holder mount for garmin products from Garmin. In this article about gps car holder mount for garmin you can see why people choose the product. Aonkey and Luxmo Luxury Mobile are also good brands to look for when you are finding gps car holder mount for garmin.
Garmin, Aonkey and Luxmo Luxury Mobile are some of the best brands that chosen by people for gps car holder mount for garmin. Find the detail in this article. Apps2car, Apps2car and Apps2car are also brands that their products are worth to check.